EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CLZ8560ADW Magic Chef Cooktop - Instructions

All Instructions for the CLZ8560ADW
1 - 15 of 15

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The grommets came apart metal from rubber.
24 of 29 people found this instruction helpful.
  • Frank from Pierce, ID
  • Really Easy
  • Less than 15 mins
I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.
Was this helpful?
Thank you for voting!
range top loose, grommets missing
12 of 16 people found this instruction helpful.
  • joseph from wildomar, CA
  • Really Easy
  • Less than 15 mins
very easy to push each grommet into range top holes
Was this helpful?
Thank you for voting!
burner would not light
11 of 16 people found this instruction helpful.
  • Albert from Clewiston, FL
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.
Was this helpful?
Thank you for voting!
missing gromet
5 of 8 people found this instruction helpful.
  • Hal from National City, CA
  • Really Easy
  • Less than 15 mins
Pushed into hole by hand, really simple
Was this helpful?
Thank you for voting!
Wouldn't ignite
2 of 2 people found this instruction helpful.
  • William from ARCHER, FL
  • Really Easy
  • 30 - 60 mins
Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done
Was this helpful?
Thank you for voting!
Igniter failed
2 of 10 people found this instruction helpful.
  • Paul from Niland, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
Was this helpful?
Thank you for voting!
original grommets broken
  • William from Richwood, OH
  • Very Difficult
  • More than 2 hours
The new grommets were NOT the correct parts, too big, so there was no repair.
Was this helpful?
Thank you for voting!
Lost on of the Rubber Grommet holding the stove grate
  • Martin from Millersburg, MI
  • Really Easy
  • Less than 15 mins
So simple would be embarrassed to give any instructions; it is so self evident.
Was this helpful?
Thank you for voting!
flashtube was burned off
  • john from mount vernon, WA
  • Really Easy
  • Less than 15 mins
put in new flashtube
Was this helpful?
Thank you for voting!
range top was missing one of the rubber grommets used to hold the grate.
  • John from Elizabeth, CO
  • Really Easy
  • Less than 15 mins
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
Was this helpful?
Thank you for voting!
Rubber grommet for stove top cover
  • Lisa from Plymouth, MA
  • Really Easy
  • Less than 15 mins
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job
Was this helpful?
Thank you for voting!
Wore out parts replaced
  • Alvin from Hudson, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Put new parts on & the only trouble I had , I had no ideal where the or how the Extension flash tubes went on had to take one of the burners off & looked it over & found out it had two little what I`ll call slices in it to put the tubes on after that it all went in place very easyly it all worked just fine
Was this helpful?
Thank you for voting!
All Instructions for the CLZ8560ADW
1 - 15 of 15