All Installation Instructions for Magic Chef Range CLY2242BDT

The grommets came apart metal from rubber.

I replaced the broken grommets with the new ones. I purchased 8 so I would have back ups because I did not feel the new one would last either. I think they cost TOO MUCH but I could not haggle for price.

Parts Used:

Rubber Grommet

Frank from Pierce, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

24 of 29 people found this instruction helpful.

Was this instruction helpful to you?

range top loose, grommets missing

very easy to push each grommet into range top holes

Parts Used:

Rubber Grommet

joseph from wildomar, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 16 people found this instruction helpful.

Was this instruction helpful to you?

burner would not light

saw burner tube was completely rusted at end and would not line up with burner. decided to go ahead and replace all three tubes. was easy to install, able to get a good cleaning job on unit in the process. works fine, wife is happy and that is what matters in a motorhome.

Parts Used:

Flashtube Extention - Front

Albert from Clewiston, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

11 of 16 people found this instruction helpful.

Was this instruction helpful to you?

igniter would no longer work, it would stick

pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.

Parts Used:

Igniter Knob

Burner Control Valve with Igniter

Randall from Rochester, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 13 people found this instruction helpful.

Was this instruction helpful to you?

woldnt light

diy

Parts Used:

Oven Valve

LOGAN from BURAS, LA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set

16 of 36 people found this instruction helpful.

Was this instruction helpful to you?

missing gromet

Pushed into hole by hand, really simple

Parts Used:

Rubber Grommet

Hal from National City, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 8 people found this instruction helpful.

Was this instruction helpful to you?

existing grates were very worn.

Just ordered a new grate. Everyother place I talked to said the one piece grate would not fit, so I am very pleased with the service you offered.

Parts Used:

Burner Grate

Alta from Rexford, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

5 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Wouldn't ignite

Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done

Parts Used:

Burner Control Valve with Igniter

William from ARCHER, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

broken oven knob

My local RV store informed me that this part was no longer made. Fortunately I discovered PartSelect.com and found the part I needed. Slipped it on and now I can use my oven!!!! Thanks!

Parts Used:

KNOB

Lee from Ocean Shores, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Old knob is broken

This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.

Parts Used:

Igniter Knob

DONNA from WARREN, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

knob worn put

easy replaced after giving proper model and serial numbers. They were very helpful sending pictures so i could choose which knob might work as they had two for the same model number. The person answering my call was very helpful. Also return of the wrong ones I ordered was easy and refund prompt. I would highly recommend this company.Gail from Mo.

Parts Used:

KNOB

gail from bethany, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

owen would not light because the coupler was not mounted right

removed flare nut and the two screws pull coupler back put in new one

Parts Used:

PILOT- OVE

ray from azle, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Igniter failed

The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.

Parts Used:

Burner Control Valve with Igniter

Range Surface Burner Igniter Wire Harness

Paul from Niland, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Rubber grommet for stove top cover

I ordered the grommet... Didn't match the others ... But it fit on , and will do the job

Parts Used:

Rubber Grommet

Lisa from Plymouth, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Wore out parts replaced

Put new parts on & the only trouble I had , I had no ideal where the or how the Extension flash tubes went on had to take one of the burners off & looked it over & found out it had two little what I`ll call slices in it to put the tubes on after that it all went in place very easyly it all worked just fine

Parts Used: