EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CLY2242BDH Magic Chef Range - Instructions

All Instructions for the CLY2242BDH
16 - 30 of 32

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
Missing oven rack
1 of 2 people found this instruction helpful.
  • Arlynn from Sagle, ID
  • Really Easy
  • Less than 15 mins
Purchased a 1999 RV discovered the oven was misssing a rack and we were unable to use.
Located the part, ordering was easy. The rack arrived and fits perfect in the oven like it was made for it.

Thanks
Was this helpful?
Thank you for voting!
thermostat temprature bulb hanger clips
1 of 4 people found this instruction helpful.
  • Dwayne from Atlanta, GA
  • Really Easy
  • Less than 15 mins
snaped them into oven cavity attached temp bulb job complete
Was this helpful?
Thank you for voting!
owen would not light because the coupler was not mounted right
1 of 4 people found this instruction helpful.
  • ray from azle, TX
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
removed flare nut and the two screws pull coupler back put in new one
Was this helpful?
Thank you for voting!
Igniter failed
2 of 10 people found this instruction helpful.
  • Paul from Niland, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
Was this helpful?
Thank you for voting!
second oven rack
  • Donna from Bushnell, FL
  • Really Easy
  • Less than 15 mins
I was very impressed with the ease in ordering the part, and the speed of delivery. All I needed was a second oven rack so that when I bake cookies, I can bake two trays instead of one, I get done in half the time now. Thank you Part Select!!!
Was this helpful?
Thank you for voting!
Rubber grommet for stove top cover
  • Lisa from Plymouth, MA
  • Really Easy
  • Less than 15 mins
I ordered the grommet... Didn't match the others ... But it fit on , and will do the job
Was this helpful?
Thank you for voting!
Lost on of the Rubber Grommet holding the stove grate
  • Martin from Millersburg, MI
  • Really Easy
  • Less than 15 mins
So simple would be embarrassed to give any instructions; it is so self evident.
Was this helpful?
Thank you for voting!
The rotating ignitor knob on my RV stove broke
  • Matthew from Vancouver, WA
  • Really Easy
  • Less than 15 mins
The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.
Was this helpful?
Thank you for voting!
range top was missing one of the rubber grommets used to hold the grate.
  • John from Elizabeth, CO
  • Really Easy
  • Less than 15 mins
Just pushed the new grommet into the hole. The grommet fit just fine and took about 10 seconds to install.
Was this helpful?
Thank you for voting!
flashtube was burned off
  • john from mount vernon, WA
  • Really Easy
  • Less than 15 mins
put in new flashtube
Was this helpful?
Thank you for voting!
original grommets broken
  • William from Richwood, OH
  • Very Difficult
  • More than 2 hours
The new grommets were NOT the correct parts, too big, so there was no repair.
Was this helpful?
Thank you for voting!
replaced oven handle
  • keith from buellton, CA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
remove and replace
Was this helpful?
Thank you for voting!
Wore out parts replaced
  • Alvin from Hudson, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Put new parts on & the only trouble I had , I had no ideal where the or how the Extension flash tubes went on had to take one of the burners off & looked it over & found out it had two little what I`ll call slices in it to put the tubes on after that it all went in place very easyly it all worked just fine
Was this helpful?
Thank you for voting!
All Instructions for the CLY2242BDH
16 - 30 of 32