CH25-68708 Kohler Engine - Parts

Hose clamp. This clamp replaces 25 237 14-S

Oil filler cap assembly - yellow.

Washer, flat 8.6 mm

Kit, fixed guard

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The cover is used to enclose the cylinder head and to provide a fill spout to add oil to the engine. This kit will include the cover, gasket, and hardware, please note the oil cap is available separately.

This air cleaner/filter cover kit is supplied by the original manufacturer for use in lawn mowers. It includes one plastic cover, and the necessary mounting hardware - one knob, one seal and two metal brackets. The cover prevents moisture and debris from entering the air cleaner housing and damaging the air cleaner. The air cleaner cover ...Read morewill need to be replaced if it becomes cracked, damaged, or loose, to prevent contaminants from entering the engine. A faulty air cleaner cover will result in low power output, increased fuel consumption, engine stalling, and engine damage if left unaddressed. Remove the fasteners that secure the cleaner cover and pull it off the equipment. Clean the air filter housing and replace the air filter if necessary. It is recommended to inspect and replace the air filter every 3 to 6 months for optimal engine performance. Align the new cover with the mounting holes and secure it in place using the appropriate fasteners.

This is a genuine OEM sourced part used on many small engines. The Kohler reed retainer is constructed of metal, and is designed to hold the breather reed. The reed retainer is sold individually. A wrench is necessary for the proper installation.

Sourced directly from the manufacturer, this 6mm Flat Washer is made of durable dark grey metal, is not part of a kit or assembly, and is sold individually. This part should be replaced when it is damaged, worn, or can no longer spread the load under a bolt sufficiently. This Washer is found in various locations, depending on your model. Customers rate this repair as Easy.

This low-permeating fuel hose is a genuine OEM replacement designed for use on small engines. It carries fuel safely and efficiently from the tank to the carburetor while minimizing fuel vapor loss and resisting degradation from modern gasoline blends. Made from durable, fuel-resistant material, it’s intended to be cut to length during in...Read morestallation and is an ideal replacement when original fuel lines become brittle, cracked, or start leaking, helping restore safe and reliable engine operation.

This is a genuine, air cleaner bracket from the Bosch manufacturer. The metal bracket is compatible with many lawn and garden engines. This item secures the air cleaner elements to the air cleaner base. It is recommended to refer to the specific manual and diagrams for repair instructions. This part is sold individually. A screwdriver is helpful in the removal and replacement.