My Orders
- Home
- CGP95363M1S2
- Instructions
CGP95363M1S2 General Electric Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Missing grate foot / bumper
9 of 13 people
found this instruction helpful.
-
Irene H from HENRICO, VA
- Very Easy
- Less than 15 mins
Put in a new foot / bumper. That's it.
Was this helpful?
Thank you for voting!
Original burner cap was chipping; must have been dropped somewhere along the line.
8 of 15 people
found this instruction helpful.
-
Mitzi from Briarcliff Manor, NY
- Really Easy
- Less than 15 mins
New burner cap replaced old; just placed over burner; no tools required.
One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
Was this helpful?
Thank you for voting!
Large burner cap finish was damaged
3 of 4 people
found this instruction helpful.
-
Richard B from CLARKSBORO, NJ
- Very Easy
- Less than 15 mins
Just lifted old burner off with my fingers and replaced with the new one. What needs to be focused on here is the fact that Part Select has such a complete line of parts rather than the difficulty in the install.
Was this helpful?
Thank you for voting!
Hi output burner never worked correctly. Burned unevenly and created soot.
1 person
found this instruction helpful.
-
Drury from Newport, NH
- Very Easy
- Less than 15 mins
So for years have been struggling with this burner. Technicians could not figure out the problem. Then one day, I noticed that the top cover did not sit properly on the burner. Lifted up the burner with the cover on it and noticed that the burner itself was warped and deformed. The top cover never sat evenly on the burner. Ordered a
... Read more
new burner and put it in and presto. The burner work properly for the first time since we bought the stove. So, check the burners and see if the top cover sits evenly on the burner.
Read less
Was this helpful?
Thank you for voting!
Food ran over the burner and damaged it.It was easy to place it back inII
1 person
found this instruction helpful.
-
Alan from PASADENA, TX
- Really Easy
- 30 - 60 mins
It only required placing the new burner in the proper location.
Was this helpful?
Thank you for voting!