Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CGLMV169DSC > Parts

CGLMV169DSC Frigidaire Microwave - Parts

All parts for the Frigidaire Microwave CGLMV169DSC

Below is a list of all parts for the Frigidaire Microwave CGLMV169DSC - Hood Combo. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the CGLMV169DSC
1-14 of 103
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$21.65

Grease Filter

If you are having trouble cleaning out your grease filter, or if it is damaged to the point of no return, maybe it is time to replace it. The grease filter is a ventilator that tra...

$33.63

Relay Switch

The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or closed to the electronic control board. Before making this repair, you will want to make sure to unplug your microwave and discharge the capacitor. Your microwave capacitor is able to store electricity in large quantities even after it has been unplugged. The most common reason for replacing your relay switch is if the microwave will not turn on but your timer still runs..

$70.94

Glass Cooking Tray

This cooking tray is a part for your microwave. You may also know this part as a turntable tray or a carousel. The function of this tray is to provide a levelled cooking surface fo...

$16.96

Light Bulb - 20W

This 20-watt lightbulb is most commonly found in the microwave. The lightbulb brightens the interior of the microwave while it is running so you can keep an eye on the food while it cooks. You will need to unplug the microwave while performing this repair. Microwaves continue to have an electrical charge directly after being unplugged, so please use caution. To access the light bulb, you will need to remove the outer cover surrounding the bulb on the top of the inside of the microwave. This is an OEM part that comes right from the manufacturer.

$35.26

Turntable Motor

This turntable motor is used in microwaves. This is what rotates the glass tray so that your food is heatied evenly. The specs for this synchronous motor are 120 Volts, 60Hz, 3rpm,...

$29.22

Air Filter

This charcoal filter is designed for use in your microwave oven. The function of this part is to remove cooking odors from the air that circulates through the microwave vent. If your current filter is old, you may want to consider replacing it. For best performance, the manufacturer recommends that you replace this filter approximately every 6 months. This product measures 11 inches in length and 2-1/2-inches in width. This part is sold individually and is black in color. This is an OEM part sourced directly from the manufacturer. Be sure to disconnect the power source from the microwave before you begin this repair.

$36.60

Door Latch

This black door latch enables the switches to make sure that the door is closed before it operates.

$31.50

Stirrer Fan Cover

$30.89

Door Latch Spring

The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If y...

$74.28

Turntable Roller Guide

The roller guide sits underneath the glass turntable tray in your microwave. If your microwave turntable tray is not rotating properly, you may need to replace the turntable roller guide. The function of this part is to house the glass plate, and rotate to cook food evenly. This part has a round piece in the middle, approximately 2 inches in diameter, and 3 arms which are approximately 4 inches in length each. Each arm has a small plastic wheel on the end that supports the glass turntable tray. This part is an OEM part sourced directly from the manufacturer, and is sold individually.

$55.43

Bracket

Mounting hardware sold separately. This part has been redesigned by the manufacturer and may appear different then the original.

$29.57

DAMPER ASSEMBLY

This is an exhaust damper assembly for a microwave, which is also known as a microwave vent damper. The damper directs air flow through the vent duct from the top or rear of your microwave, depending on your model, to allow the air to flow outside and prevent outside air from coming in. You will need to uninstall your microwave from the wall to access the exhaust damper. Once you have gained access to the damper, simply slide the old part out, and slide the replacement part in. This is an OEM replacement part that is sourced directly from the genuine manufacturer.

$7.21

SCREW-UNIFIED

$139.26

RACK

All Parts for the CGLMV169DSC
1-14 of 103