CGEB30S9FS4 Frigidaire Wall Oven - Parts

This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this genuine OEM fan blade works with the convection motor to circulate and distribute heat evenly throughout the oven. If your oven is not gett...Read moreing hot enough or the heat is not circulating properly, or if the fan blade in your oven has become warped, damaged, or chipped, it needs to be replaced immediately. To replace the fan blade, disconnect your range from the power and locate the fan assembly. With the appropriate screwdriver and wrench, remove any assembly covers and the securing nut from the blade. Once the nut is removed, install the new blade and secure it and re-install the cover.

This is the exterior door panel with glass. Outer glass is NOT sold separately.

This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirely of metal, and it is thin and bow-shaped. The retainer clip is roughly 3.5 inches long and 2 inches wide. The most common reason for needing to replace this pa...Read morert is if your current one is damaged or missing. This clip is a genuine OEM piece sourced directly from the manufacturer.

Sold individually.

This fan blade retainer nut in your oven secures the fan blade onto the motor shaft, preventing it from coming loose during operation. You can typically find it at the back of your oven behind a cover. If you notice that the fan blade becomes wobbly or does not rotate smoothly, or your oven starts to make rattling or scraping sounds, the ...Read morenut may be damaged. If the fan blade cannot spin properly, your food may cook unevenly. Your oven will also work harder and consume more energy to maintain the desired temperature. To access the nut, you will need to remove the back panel of your oven. Remove any screws or release any clips holding it using a screwdriver. To remove the nut itself, you will need either a wrench or a pair of pliers to loosen it from the motor shaft. The fan blade is sold separately from this genuine OEM nut.

Also known as a cut-out fuse. To reset, push red button.

Presenting an authentic Adapter Assembly vent tube with a converter from Frigidaire for your oven. This product is a genuine replacement part specifically designed for Frigidaire range/stove/oven vents. Contributing to the smooth functioning of your appliance, this vent tube curtails the amount of smoke vented through the oven's tube. Pri...Read moreor to installation, ensure your oven surfaces are cool to touch and the power supply is off. Adherence to safety practices is advised while installing this part, thus it is recommended to wear work gloves for enhanced protection. Root for durability with this steadfast genuine Frigidaire part, tailored for your convenience.