EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CG200B Jenn-Air Cooktop - Instructions

All Instructions for the CG200B
1 - 15 of 137

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced filter
486 of 513 people found this instruction helpful.
  • ELOISE from MILFORD, OH
  • Really Easy
  • Less than 15 mins
pulled old one out , cleaned the area & replaced with the new one.
Was this helpful?
Thank you for voting!
one of the surface burner knobs melted and then cracked
474 of 479 people found this instruction helpful.
  • Ronald from Philadelphia, PA
  • Really Easy
  • Less than 15 mins
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.
Was this helpful?
Thank you for voting!
Old grease filter that I actually did not know I had to change
451 of 540 people found this instruction helpful.
  • deborah from fort pierce, FL
  • Really Easy
  • Less than 15 mins
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen
Was this helpful?
Thank you for voting!
Old parts needed replacement
145 of 212 people found this instruction helpful.
  • Teresa from Clayton, CA
  • Really Easy
  • Less than 15 mins
Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.
Was this helpful?
Thank you for voting!
3 out 4 surface burner knobs were broken
174 of 322 people found this instruction helpful.
  • Aaron from Elkton, MD
  • Really Easy
  • Less than 15 mins
Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!

Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.

Also, your site was easy to navigate and find what I was looking for. Many thanks!
Was this helpful?
Thank you for voting!
My Jenn-Air is an "antique." The filter was disgusting!
168 of 324 people found this instruction helpful.
  • marion from aspen, CO
  • Really Easy
  • Less than 15 mins
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away the nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!
Was this helpful?
Thank you for voting!
stem on the dial split, couldn't turn the burner on
150 of 289 people found this instruction helpful.
  • Kathy from Bell, FL
  • Really Easy
  • Less than 15 mins
threw out the old and slipped on the new dial....
Was this helpful?
Thank you for voting!
The burner knob brock
148 of 287 people found this instruction helpful.
  • Warren from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Went broke purchasing the very simple part through you PartSelect Appliance Parts
Was this helpful?
Thank you for voting!
old knobs broken and couldn't turn on burner
148 of 291 people found this instruction helpful.
  • Susan from Cherry Hill, NJ
  • Really Easy
  • Less than 15 mins
Replacement parts fit as suggested by model number (newer parts are a little different but fit fine). Grates look a bit more modern but hopefully will work fine too.
Amazingly fast shipping!
Was this helpful?
Thank you for voting!
Falling apart 20 year old grease filter for downdraft counter rangetop
147 of 289 people found this instruction helpful.
  • Roe from Raleigh, NC
  • Really Easy
  • Less than 15 mins
Cleaned out the downdraft cove, inserted the new filter, and put old filter in garbage can. Laughing. Thanks. Wish you had a FAQ's hotline. I'd like to know if the radiant inserts fit the older coil-type models.
Was this helpful?
Thank you for voting!
broken spindel on knob
145 of 284 people found this instruction helpful.
  • Stephen from Bethesda, MD
  • Really Easy
  • Less than 15 mins
took old off, put new knob on, by hand
Was this helpful?
Thank you for voting!
Knob broke
68 of 132 people found this instruction helpful.
  • Peggy from Ellwood City, PA
  • Really Easy
  • Less than 15 mins
pulled it off, went to internet to see if I could find.
Did Find. Ordered and replaced.
Was this helpful?
Thank you for voting!
cooktop comes with two burners and a grill. I needed 4 burners.
36 of 45 people found this instruction helpful.
  • Clifton from Redlinds, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Never really used the grill and needed 2 more burners so I just pulled out the grill assembly and plugged in the burner assembly, added the new pan cover and new grates and viola, I had a four burner stove. Still can pop the grill back in if needed. Much less expensive than buying a whole new cooktop.
Was this helpful?
Thank you for voting!
fan switch broke
24 of 25 people found this instruction helpful.
  • Jill from Potomac, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I unscrewed the housing unit, pulled out the 2 connectors and here is the hard part, getting the metal washers off the small posts. First I tried needle nose pliers, then I used a rubber mallet to bang it out from the top side far enough to use a reg. hammer to pull it off from the underside. Finally I got it off enough to break the washe rs with the needle nose pliers. Putting it back together was a breeze,took all of 5 minutes.
Was this helpful?
Thank you for voting!
The right rear burner ignition switch malfunctioned.
19 of 19 people found this instruction helpful.
  • Max from Plano, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
Repair is simple as long as you TURN OFF THE CIRCUIT BREAKER first. After that, take off the cover over the switches (pull knobs off, remove 2 screws and lift off the cover), pull the bad switch straight up off the gas valve, pull the two wires off the switch, plug them back onto the new switch, place it back over the gas valve stem, rea ssimble the cover and knobs, turn back on the circuit breaker, and verify that ignition switch works. Not a hard repair. (HINT: while you are waiting on the replacement part, you can light the bad burner by turning on the opposite burner ignition switch and using that "spark" to light the other burner.)
Was this helpful?
Thank you for voting!
All Instructions for the CG200B
1 - 15 of 137