My Orders
- Home
- CFGF3053LSG
- Instructions
CFGF3053LSG Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven took too long to heat up
-
JAONNE from GAFILED, NJ
- Really Easy
- 15 - 30 mins
-
Nutdriver
un bolted the 6 nut driver heads found probe wire un pluged it 1/4 turn from lock it was in and pull out replace slide in new probe 1/4 turn to lock it in place replace nut driver self tappers and test simple!!
Was this helpful?
Thank you for voting!
the display panel was broken off
-
julian from canton, OH
- Easy
- 15 - 30 mins
-
Nutdriver
removed the back panel and the display, transferred the screen to the new display and mounted in the front fascia frame
Was this helpful?
Thank you for voting!
Aluminium foil fused to the panel
-
James from Durham, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
I removed the two back screws, slid out the old panel, then fitted in the new panel (it fit perfectly) and replaced the screws. Five minutes, tops.
Was this helpful?
Thank you for voting!
replace lower oven floor
-
ed from petaluma, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
removded 2 screws at rear of panel, moved panel toward rear of oven, lifted up and out. Slid in new panel in front groove then lowered onto oven floor and secured it with the 2 screws at rear of oven.
Was this helpful?
Thank you for voting!
Broken timer board
-
Paul from Saugus, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
slid range out halfway . Remove top back panel, remove 4 screws in board and replaced in same order
Was this helpful?
Thank you for voting!