CFES3025LS1 Frigidaire Range - Parts

This authentic OEM high-limit thermostat, also known as a limit switch or cooling fan thermostat, serves as a safety feature to prevent the oven from overheating. It monitors the temperature inside the oven and activates the cooling fan when the temperature exceeds a certain limit. The cooling fan helps dissipate heat and maintain a safe ...Read moretemperature. The high-limit thermostat is usually situated inside the top panel. If the high-limit thermostat is broken or faulty, the cooling fan may fail to turn on, leading to excessive heat buildup inside the oven. You might also notice that your food cooks unevenly since the oven struggles to maintain the desired temperature. In some cases, if the high-limit thermostat is completely non-functional, the oven may not heat up at all. You can test the sensor at room temperature by measuring the resistance between the two prongs at the end of the sensor connector. The resistance should read approximately 1080 - 1090 ohms at room temperature. To access the thermostat, refer to your user guide for detailed instructions. Generally, you need to ensure the power is disconnected at the breaker, lift the top panel on its hinges, remove the screws on the plate under the burners, take out the burners and plate, disconnect the wires from the old thermostat, and remove the mounting screws to release it. Please note that the replacement part is sold separately from the cooling fan.

This range surface element switch, also known as an infinite switch or burner control switch, regulates the heat output of the large 8-inch surface burner on your stove, oven, or cooktop. Designed for precise temperature control, it ensures consistent cooking performance. Ideal for replacing a faulty switch, this OEM component restores pr...Read moreoper burner operation. Installation typically involves disconnecting power, removing the old switch, and securing the new one in place.

Sold Individually. Pan Head Screw - 8-18ab X 0.375

This 12-inch radiant surface element is designed for Frigidaire electric ranges, delivering 2700 watts of power at 240 volts for fast and even heating. Built with a fiber-bonded compressed material, the element provides reliable performance and durability—minor cracks in the outer rings are considered cosmetic and do not affect functional...Read moreity. Ideal for replacing a burner that no longer heats, this component restores your cooktop’s efficiency and safety. Installation requires disconnecting power at the breaker for protection before positioning the new element securely in place.

This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirely of metal, and it is thin and bow-shaped. The retainer clip is roughly 3.5 inches long and 2 inches wide. The most common reason for needing to replace this pa...Read morert is if your current one is damaged or missing. This clip is a genuine OEM piece sourced directly from the manufacturer.

This part is a levelling leg and it is used in conjunction with your range. The function of this part is to supply stability and support to your appliance. This part is adjustable to allow you to tailor each leg to meet your levelled cooking needs. A range typically uses four of these parts, and this model is sold individually. This part ...Read moremeasures to be just over a square inch wide, and almost two inches high. The body of this part resembles a screw and is made of metal. The bottom of the leg is black, flat, and made of plastic.

This burner switch controls power delivery to the surface element, allowing accurate heat adjustment during cooking. Reliable switching improves safety and cooking precision. Replacing a faulty switch restores responsive control and consistent heating.

Sold individually.