Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heating element burned out
3 of 4 peoplefound this instruction helpful.
Pat from GREELEY, CO
Very Easy
Less than 15 mins
All you do it unplug the old one and plug in the new one.
Was this helpful?
Thank you for voting!
I forgot to remove something I had saved in the oven, planning to remove it before using the range.
3 of 4 peoplefound this instruction helpful.
Marilyn from Clearwater, FL
Easy
Less than 15 mins
Very simple. Removed oven rack that had melted residue on it and replaced it with the new one from your company. I want to tell you that the delivery service I received was just geat. Took less than 48 hours to arrive at my home from the time I placed the order on line. Keep up the good work and I will be happy to share my experience
... Read morewith those in need of you services. Thanks. Marilyn Kasson
Read less
Was this helpful?
Thank you for voting!
N/A
4 of 7 peoplefound this instruction helpful.
Dineshbhai from Rincon HWY21, GA
A Bit Difficult
Less than 15 mins
Screw drivers
I had open back cover and remove the switch than replace new switch. Makesure cable conection.
Was this helpful?
Thank you for voting!
Broken hoven door handle
3 of 4 peoplefound this instruction helpful.
Mayola from RIO RICO, AZ
Really Easy
Less than 15 mins
Screw drivers, Wrench (Adjustable)
Screw the handle, that it...
Was this helpful?
Thank you for voting!
The draw glide was broken and the clock had stopped working.
3 of 4 peoplefound this instruction helpful.
Patty from Carlisle, KY
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
With the draw glide, I simply had to slide it into position. To replace the clock, I had to remove the back panel and then replace the broken clock with the new one by simply turning a few screws and using a pair pliers to removing the color coded wires.
Stove was dropped and had broken, bent frame and adjuster feet
2 of 2 peoplefound this instruction helpful.
Paul from PORT ORANGE, FL
Really Easy
15 - 30 mins
Screw drivers
New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.
Was this helpful?
Thank you for voting!
No problems.
2 of 2 peoplefound this instruction helpful.
silas from CARTHAGE, MS
Really Easy
30 - 60 mins
Nutdriver
I followed the instructions I remembered from the video when I ordered the clock timer. Had no problem at all. I am enjoying my oven again.
Was this helpful?
Thank you for voting!
Original terminal degraded and faulty
2 of 2 peoplefound this instruction helpful.
Robert from PRAIRIEVILLE, LA
Easy
15 - 30 mins
Screw drivers
Turn off power, remove heat coil assembly and drip pan. Unscrew the terminal assembly from the range top. Cut back 3 inches on each terminal wire and strip insulation 3/8 inch. Terminal assembly should be with the short side of the black block (from the side securement hubs) facing toward the coil stems. Slide the shrink wrap onto
... Read more each wire and Twist each old with each new wire using the wire nuts and slide the shrink wrap Over each. Using a hair dryer, heat gun, or open flame carefully shrink the wrap. Secure the terminal back in place on the range.
Read less
Was this helpful?
Thank you for voting!
the burner stop working
2 of 2 peoplefound this instruction helpful.
Anthony J from HAMMONTON, NJ
Really Easy
15 - 30 mins
Screw drivers
Just followed the instructions
Was this helpful?
Thank you for voting!
Original utility drawer assembly was damaged
5 of 11 peoplefound this instruction helpful.
Randy from Phoenix, AZ
Really Easy
15 - 30 mins
Screw drivers
Assembled liner, panel and drawer. Installed the drawer guides and slid complete assembly in place.
There is an installation video , but it was so easy, and if you clean your drip pans from those inevitable spills you can do this. I have zero mechanical abilities and I did. The website makes it easy to find your part, and the original literature you got with your appliance will direct you where to find the
... Read moreModel # and serial # on your Frigidaire Range. Order your part on line, get it in the mail and insert the Element yourself.Very happy with my transaction.
Read less
Was this helpful?
Thank you for voting!
Oven was not working
2 of 2 peoplefound this instruction helpful.
kenneth from GRETNA, LA
Very Easy
Less than 15 mins
Nutdriver, Pliers
I changed the clock , it was very easy ! I changed wire for wire then put the clock in . Simple task but, make sure power if off. You can take a picture of wires with your phone, if you like .
I have to say Parts Select is one of the best companies that I've ever done business with . They help troubleshoot the problem send you
... Read morethe parts on time and make refunds as easy as 123.
I am not easy to please because, of so much incompetence where ever you go these days. That's the reason I took the time to write all this .These folks are the real deal. Kenny G . In Louisiana !
Read less
Was this helpful?
Thank you for voting!
Oven and broiler didn't work.
2 of 2 peoplefound this instruction helpful.
Dennis from NEW PRT RCHY, FL
Very Easy
Less than 15 mins
Pliers, Socket set
I followed the video instruction. It was super easy and quick. It took no more than 10 minutes.
Was this helpful?
Thank you for voting!
problem pulling out bottom tray on range
2 of 2 peoplefound this instruction helpful.
rosetta from COLUMBIA, VA
Really Easy
Less than 15 mins
just put in slot
Was this helpful?
Thank you for voting!
oven would not turn off, and temperature was inconsistent
3 of 5 peoplefound this instruction helpful.
Aaron from Royal Center, IN
Really Easy
Less than 15 mins
Nutdriver
Removed 8 screws from back, took out timer and replaced. Simple. $112 fix versus replacing with a $600 oven. Good for another 5 years!
My Orders
