My Orders
CER1100AAH Magic Chef Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip bowls were burned and tacky
473 of 483 people
found this instruction helpful.
First I removed the old bowls and replaced them with the new.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip bowls needed to be replaced
455 of 546 people
found this instruction helpful.
took old bowls out, put new bowls in, took a coffee break
Other Parts Used:
Was this helpful?
Thank you for voting!
Old drip pans stained
218 of 427 people
found this instruction helpful.
Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!!
Other Parts Used:
Was this helpful?
Thank you for voting!
one of my burners would only work half the time, and you had to wobble it to make it work
138 of 265 people
found this instruction helpful.
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.
Other Parts Used:
Was this helpful?
Thank you for voting!
We needed new drip pans and no one carried the model we needed
67 of 71 people
found this instruction helpful.
we removed the old pans after first removing the electric heating element and simply inserted tne new pans
Other Parts Used:
Was this helpful?
Thank you for voting!
Replaced drip bowls in stove
71 of 134 people
found this instruction helpful.
Took out the old drip bowls and replaced with new bowls.
Other Parts Used:
Was this helpful?
Thank you for voting!
Rented appartment in which none of the drain pans were the proper size making it very difficult to cook
67 of 131 people
found this instruction helpful.
I removed the element and then the drain pan and replaced with the new correct pans. I replaced the element and all was well.
Other Parts Used:
Was this helpful?
Thank you for voting!
The heating element would not adjust to the knob settings. The element was always at maximum heat, even when I set the knob on minimum heat.
32 of 36 people
found this instruction helpful.
This was easier than putting in a new light switch. The old receptacle would not make the necessary adjustments to the heat element to maintain the desired temperature. Even when I turned the temperature knob to "minimum", the heat element would bun at the maximum temperature. I pulled the element from the Receptacle, raised the stov
... Read more
e top to expose the receptacle and wiring. My stove was too heavy to pull from the wall, so I had to go to the breaker box to flip off the breaker. I returned to the stove and snipped the non working receptacle (with a wire cutter) and attached the new receptacle with the ceramic wire nuts, that came with the assembly. I turned the electric-breaker back on, and tested the heat element. The element will now make the on/off adjustments on each temperature setting, to maintain the correct heat.
I ordered two receptacles because I wanted a spare. I do a lot of baking during special-day dinners, for my family members... and due to the age of my stove, I bought the bake element as a "back up" if the present Bake-element burns out.
I ordered two receptacles because I wanted a spare. I do a lot of baking during special-day dinners, for my family members... and due to the age of my stove, I bought the bake element as a "back up" if the present Bake-element burns out.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!