My Orders
- Home
- CEP90302N1SS
- Instructions
CEP90302N1SS General Electric Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stovetop radiant burner went out
6 of 10 people
found this instruction helpful.
-
Frank from Marietta, GA
- Easy
- 15 - 30 mins
-
Screw drivers
Turned off power at circuit breaker. Disconnected electrical connections from stove and lifted stove top out of counter. Removed glass top by removing about 8 screws from side of stove top.Replaced burner element and replaced glass top.
Was this helpful?
Thank you for voting!
Stovetop stopped working
3 of 3 people
found this instruction helpful.
-
Gary from FERN BCH, FL
- Easy
- 30 - 60 mins
-
Socket set
Discovered the control power board had power in to the transformer but no power on the other side of the transformer. Replaced the power board all works well. Took a picture of the wires before disconnecting.
Was this helpful?
Thank you for voting!
Installing new cooktop in an island
2 of 4 people
found this instruction helpful.
-
Donald E from SALEM, AL
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
The included brackets would not work, so I ordered the alternate installation kit from this site and it made the job go easy.Thanks
Was this helpful?
Thank you for voting!
Burner not operational.
-
Gerald from Philadelphia, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Disconnected power supply. Removed damaged element by releasing retainer clips and unplugging wire contacts. Replaced with new element.
Was this helpful?
Thank you for voting!