My Orders
- Home
- CE40C6WMAA
- Instructions
CE40C6WMAA Frigidaire Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
dead burner
3 of 7 people
found this instruction helpful.
-
Jan from Storm Lake, IA
- Really Easy
- Less than 15 mins
I unplugged the dead burner and plugged in the new burner. Very easy. No tools needed.
Was this helpful?
Thank you for voting!
burner was damaged
1 person
found this instruction helpful.
-
Thomas from Elizabeth City, NC
- Really Easy
- Less than 15 mins
snap out the old one and snap in the new
Was this helpful?
Thank you for voting!
Terminal block was bad.
1 person
found this instruction helpful.
-
Chuck from EVANSVILLE, IN
- Very Easy
- Less than 15 mins
-
Screw drivers
Cut the old block off tied new wires to hot wires . That easy!
Was this helpful?
Thank you for voting!
Burner element failed
1 person
found this instruction helpful.
-
Robert from New Castle, PA
- Very Easy
- 15 - 30 mins
Plugged the new one in and it worked.
I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
I did search out Frigidaire parts and there are other types tha may or may not work. Calrod burners are not all that unusual. I went with the real thing.
Was this helpful?
Thank you for voting!
replaced terminal block for element
1 person
found this instruction helpful.
-
Donna from UNION, OR
- Really Easy
- 30 - 60 mins
-
Screw drivers
followed the video provided on line which was very helpful..
Was this helpful?
Thank you for voting!
2 burner elements not heating
1 of 2 people
found this instruction helpful.
-
Brian from MENASHA, WI
- Really Easy
- 15 - 30 mins
-
Screw drivers
Simple: Snip old terminal block off. Strip wires. Connect new Terminal block using twist-on wire caps (provided in kit). Mount to stove top with existing screw. TIP: Make sure you insert the wire lead into the terminal block the right way (not upside down). Otherwise burner element will not insert into terminal block properly.
Was this helpful?
Thank you for voting!
Heating coils stop heating
1 of 2 people
found this instruction helpful.
-
Sharon from TEMPLE, GA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Remove heating coils raise stove top unsrew terminal blocks cut wires assemble terminals strip wires twist wires together install wire nuts apply heat shrink lower stove top plug in stove repair complete.Thanks.
Was this helpful?
Thank you for voting!
Burner cooked things very SLOWLY.
1 of 2 people
found this instruction helpful.
-
Kathy from Fremont, OH
- Really Easy
- Less than 15 mins
Pulled old burner out, pushed new one in. WHAT A DIFFERENCE!! Heats very quickly, now.
Was this helpful?
Thank you for voting!
plastic spatula melted onto the unit
1 of 2 people
found this instruction helpful.
-
Thomas from Port Allen, LA
- Really Easy
- Less than 15 mins
I unplugged the damaged unit and plugged in the new one.
Was this helpful?
Thank you for voting!
An aluminum saucepan had overheated and melted onto the element.
1 of 2 people
found this instruction helpful.
-
Alice from Batesville, AR
- Really Easy
- Less than 15 mins
Unplugged the element and the melted on pot. Plugged in the new element. I thought I might need a whole new cooktop but a new element was very easy to find online.
Was this helpful?
Thank you for voting!
Old cooktop burner element died.
1 of 3 people
found this instruction helpful.
-
Lawrence from Plainview, NY
- Really Easy
- Less than 15 mins
First I unplugged the element that wasn't working and switched it with one that was to confirm that it was the burner element, and not the cooktop wiring, that was the problem. Once that was confirmed, I ordered a new element from partselect.com. Upon arrival of the new element several days later, I plugged it into the empty plug on the c
... Read more
ooktop and voila, we're cooking on all 4 again.
Read less
Was this helpful?
Thank you for voting!
burnurplate broke
0 of 1 people
found this instruction helpful.
-
helen m from eureka, MT
- Really Easy
- Less than 15 mins
ordered a new one and I put it inn.Pluged inn and I was ready to cook!
Was this helpful?
Thank you for voting!
Range burner coil worked intermittenly
0 of 1 people
found this instruction helpful.
-
MARK from LIBERTY LAKE, WA
- Easy
- Less than 15 mins
Unplugged range and cut wires on existing burner plug. Connected the replacement plug with the provided wire-nuts. Secured with provided shrink-wrap. Reattached burner plug to to range top, and plugged in the burner coil. Presto.
Was this helpful?
Thank you for voting!
No burner
0 of 1 people
found this instruction helpful.
-
Janet from North Vernon, IN
- Really Easy
- Less than 15 mins
I just plugged it into the receptacle on the stovetop and turned the thing on, and it worked! I'd been without the 4th burner for quite some time. Nice to have it back!
Was this helpful?
Thank you for voting!
Burner units needed to be replaced from age/overuse.
0 of 1 people
found this instruction helpful.
-
Beth from Myrtle Point, OR
- Really Easy
- Less than 15 mins
Easy to open package and plug in unit! Too simple and quite happy with end results!
Was this helpful?
Thank you for voting!