CCW5244W0 Whirlpool Washer - Instructions

Put pump in the way it came out. Used shield from old punp. New shield supplied did not fit. Too large for this pump. Put out going water hose clamp on plugged in the two wires. Tighten the 3 screws and done

Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol ... Read more oring refer handles. Thank you

Try to use needlenose plyers to get broken part off, but couldn't do it, so my brother had to come and use bigger plyers to get the broken part off. He says the new part was easier to put on than the old was to take off Did not even need the new screw

Replaced the faucet adapter, works fine

I bought the portable dishwasher on Craigslist, and it didn't have the connector that goes on the kitchen faucet. Ordered it here, got it in a few days, and didn't need any tools - just had to screw it on. Good as gold!

Used angle screwdriver to tighten.

I unsrew the faucet head, and attached th e adapter

I knew I needed a faucet adapter, but thought I could just go to my local home depot and get the part...not so much. After 3 trips and not getting the part I truly needed I ordered the part from partselect. I received it literally the day after I ordered it, screwed in place with no tools, attached the coupler/hoses to the faucet and wa ... Read more shed dishes. I wish I would have ordered the part from partselect before even bother with home depot. I would have saved myself a lot of trouble! Extremely happy! Thank you!

The replacement part was "perfect" and the parts dept. lady I spoke with, was professional in description and correctly fitting part. The part arrived, we popped off the other where it would have fit, then the "collar" below it, put on the new collar, the dial and we were done. Before that, we'd been using a pair of pliers to move the dia ... Read more l around to do the laundry. This was an easy experience, quick upon arrival and we we're pleased with the purchase and how nice it is to have a working appliance again.

Removed old pieces and installed new parts

replaced the faucet adapter I did not save when I change out the kitchen sink faucet set

Ordered a new Faucet Adapter! Simple

Found the adapter on Parts select through a google search. Unscrewed the existing faucet aerator and srewed in the adapter. The plastic shrink wrap holds the washer and screen in place, so don't open it until you're ready to install. Finger snug does it, only use the pliers to remover the old aerator from the faucet. Normally, I don't ... Read more use pliers, but both of these parts were round and had vertical serrations to engare the plier teeth.