CBE26FCW (P1137949NW) Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people
found this instruction helpful.
-
Ivanka from Atlantra, GA
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh
... Read more
t bulb in was not the problem.
Read less
Was this helpful?
Thank you for voting!
Block broke
1 of 4 people
found this instruction helpful.
-
Edward from Crimora, VA
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people
found this instruction helpful.
-
peggy ann from forest city, NC
- Really Easy
- Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people
found this instruction helpful.
-
Shirley from Las Vegas, NV
- Really Easy
- Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
Bowl -Drip and gasket
0 of 1 people
found this instruction helpful.
-
Walid from Worcester, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
it was relay easy when you get the right pats .so
Thanks for .
PART Select.
Best regard .
Walid
Thanks for .
PART Select.
Best regard .
Walid
Other Parts Used:
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people
found this instruction helpful.
-
Judith from Phoenix, AZ
- Really Easy
- Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
Drip bowls tarnished.
-
Jennifer from Albion, NE
- Really Easy
- 15 - 30 mins
Remove heating element coils. & old drip pans. Install the new drip pans and reinsert the heating elements and insure all elements were level. For aesthetic reasons I replaced all the drip pans - 2 x 8" & 2 x 6".
Was this helpful?
Thank you for voting!
range installer broke a screw off & busted the plastic piece
-
Christina from West Des Moines, IA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Had to screw off old terminal block & screw on new one
Was this helpful?
Thank you for voting!
circuit breaker blew
-
Richard from Sarasota, FL
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in abo
... Read more
ut 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
Read less
Was this helpful?
Thank you for voting!
needed a new drip bowl and couldn't find ons that fit exactly but you had it
-
Elsie from Garner, NC
- Really Easy
- Less than 15 mins
I removed the old one and put in the new one. Works great!!!!!!!!!!!!
Was this helpful?
Thank you for voting!
To Old Needed To Be Replace
-
ROSARIO from MESQUITE, TX
- Really Easy
- Less than 15 mins
Actualy I just removed the old ones and replace them with the new ones . And thank you for your prompt delivery I found some one I can trust . Thanks again . Mrs bolanos
Other Parts Used:
Was this helpful?
Thank you for voting!
rusty pans
-
Stewart from Hanover, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
simply remove the old and install the new; perfit fit
Other Parts Used:
Was this helpful?
Thank you for voting!