EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CAH4205AWW Crosley Washer - Parts

1 - 12 of 139

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bellow – Part Number: 12002533
No Longer Available
Bellow
Part #12002533
Also known as the door boot seal. This part includes the drain and plug. The seal is located around the door of the washer to prevent water from leaking.
Screw – Part Number: W11233072
$21.45
In Stock
Screw
★★★★★
★★★★★
(6)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Washer Hose Clamp – Part Number: WP596669
$7.47
In Stock
Washer Hose Clamp
★★★★★
★★★★★
(1)
Part #WP596669
This appliance hose clamp holds a hose firmly against its connection to help prevent leaks and keep it from slipping loose during operation. It applies pressure around the hose where it joins a pump port or other fitting. A bent, broken, corroded, or weakened clamp may allow water to drip from the connection or the hose to detach. Replacing a damaged clamp helps restore a secure connection. Disconnect power and shut off the water supply before servicing, then check for leaks after reassembly. This is an OEM part sourced directly from the manufacturer.
Rubber Foot Pad – Part Number: WP210684
$11.77
In Stock
Rubber Foot Pad
★★★★★
★★★★★
(1)
Part #WP210684
The leveling leg pad or foot pad fits over the leveling leg on your washing machine. The foot pad is designed to protect your floor and keep the washing machine level and in place. This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Many of our customers have rated this repair as very easy. To complete the repair, turn the old leg counter clockwise to remove it. Then, simply remove the old pad and replace it with the new one. Finally, re-attach the leg by turning clockwise. Ensure that the washer is level, and adjust the leg accordingly if it is not.
Lip Seal Kit – Part Number: 12002022
$82.41
In Stock
Lip Seal Kit
★★★★★
★★★★★
(2)
Part #12002022
This genuine lip seal kit is designed for front-loading washing machines and serves as a critical component in maintaining a watertight seal around the spinner shaft between the spin basket and the outer tub. By preventing water leakage, it helps preserve the integrity of the drum assembly and ensures efficient washer performance. The kit includes an earlier and revised lip seal, grease, an O-ring, a seal tool, a washer kit, and installation instructions. Compatible with select models from Whirlpool, Maytag, KitchenAid, and related brands, this OEM kit is commonly used during drum rebuilds to restore proper sealing and reduce the risk of water damage. Installation requires disassembly of the tub and careful application of the included components.
Drive Belt and Motor Isolator Kit – Part Number: 12001788
$30.53
In Stock
Drive Belt and Motor Isolator Kit
★★★★★
★★★★★
(8)
Part #12001788
This kit contains a flat drive belt, two motor isolators, and an instructions sheet. The drive belt is made to slip on the pulley until the basket gets up the desired speed.
Inner Door - white – Part Number: WP22003275
$98.97
In Stock
Inner Door - white
★★★★★
★★★★★
(8)
Part #WP22003275
This inner door assembly is twenty-two inches long. It is all white in color and is made of plastic.
Dispenser Lid – Part Number: 22004481
No Longer Available
Dispenser Lid
Part #22004481
This part is used to cover up the dispenser.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Screw – Part Number: 33002973
No Longer Available
Screw
Part #33002973
This screw is sold individually.
Dispenser Bezel – Part Number: 22002290
No Longer Available
Dispenser Bezel
Part #22002290
This part mounts to the top panel of the washer and houses the dispenser.
Drain Pump - 120V 60Hz – Part Number: WP25001052
$128.66
In Stock
Drain Pump - 120V 60Hz
★★★★★
★★★★★
(14)
Part #WP25001052
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
1 - 12 of 139