BTF1240FS1 Crosley Washer - Parts

This is a door striker, it is gray in color and is a part found on your washer. The purpose of the striker is to keep your washer door closed for usage. This piece will attach to your appliance lid and will activate the door switch when your lid is closed. The most common reasons for needing to replace this part are if your lid will not c...Read moreonsistently open or close, and your washer will not consistently start. The only tool you will need to complete this installation is a Phillips screwdriver.

This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assem...Read morebly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.

This shock absorber kit is an authentic OEM part that is sourced directly from the manufacturer. The kit includes two dual-stage shock absorbers, one spare shock mounting pin, and four locking nuts. These shock absorbers keep your front-load washer from shaking vigorously by absorbing and reducing vibrations from the wash and spin cycles ...Read moreof your appliance. This kit comes with two shock absorbers because it is recommended to replace both at the same time, as they wear at the same rate. To access your washer shock absorbers, simply remove the lower access panel after disconnecting the power to the appliance.

This washer drain pump assembly is designed to efficiently remove water from front-loading washing machines during the drain cycle. It plays a critical role in maintaining proper water flow and cycle completion by actively pumping water out of the drum. Compatible with a wide range of models across multiple brands, including Frigidaire, E...Read morelectrolux, Kelvinator, White Westinghouse, Kenmore, and Tappan, this component ensures reliable performance and long-term durability. Replacing a faulty pump can resolve issues such as standing water, incomplete cycles, or drainage failure. Installation may require basic tools and should be performed with the appliance disconnected from power and water sources.

This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your appliance to make it leveled. This model is made entirely of plastic and is white in color. It is just under 2.5 inches long, 1.5 inches wide, and the head has a diameter of roughly 1.5 inches.

This is a single spring with insulator, but you may also know it as a suspension spring. It is a part for your washing machine. If your tub is no longer stable, which would cause shaking, moving, and excess noise, you may need to replace this part. The tools you will need in order to make this repair include a Phillips screwdriver and a p...Read moreair of locking pliers. You will find the insulator on each end of this piece. We recommend replacing both springs in your appliance at the same time to ensure even wear.

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Sold individually.

This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.

Is your Toro equipment not operating as smoothly as it used to? Sounds like you might need a new upper handle. Let us help you get back to peak performance with our Authentic Toro Upper Handle. This isn't just any replacement part; it's a genuine Toro part that?s specially designed for your equipment. Why is this important? Well, just l...Read moreike you'd use the right key to open a specific lock, Toro parts are meant to fit and perform perfectly with your Toro machine. This replacement upper handle will work seamlessly with your equipment?s existing parts, helping bring back that like-new functionality. The Authentic Toro Upper Handle is made from top-quality materials that won?t let you down. This means your equipment isn't just patched up, it?s upgraded. You can expect a longer life and more efficient operation, all thanks to this single replacement part. We've made sure that installing your new handle is as straightforward as possible. You don't need to be an expert fixer, you'll be able to easily install it and get back to using your equipment with minimal downtime. With this Toro Upper Handle, we're offering not just a great product, but also the confidence that you're restoring the integrity of your machine with a part designed by the original equipment manufacturer for maximum compatibility. You've invested in quality Toro equipment - keep it running optimally with this dependable upper handle replacement.

This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.

Also known as a Drum Baffle. Sold individually.