EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...
Models > BM4CSSAC > Instructions

BM4CSSAC Homelite Trimmer - Instructions

All Instructions for the BM4CSSAC
1 - 5 of 5
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced straight shaft, and the gear head.
Removed the 2 bolts holding the gear head to shaft. On my model I had to remove the complete trimmer head, then using 2 wrench take the trimmer head adapter off the gear heD. One video showed simply putting a screwdriver in the notch behind trimmer head and unscrewing complete head. Mine of course was slightly more involved but still quite easy once I saw what needed to be done.
Parts Used:
STRAIGHT SHAFT ASSEMBLY
  • Tim from HOLLISTER, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Parts Used:
Carburetor Assembly
  • MIKE from LOXAHATCHEE, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke my trimmer head trying to replace the string.
I was amazed I found this EXACT trimmer head that fit PERFECTLY and for a VERY REASONABLY PRICED!!!

I’ll be back as needed!
Parts Used:
Arborless Bump-Feed Trimmer Head
  • Dwight from Saint Charles, MO
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trimmer head worn out from normal use
Lay trimmer on bench so Phillips head screw on end of shaft just above trimmer head is up. Turn trimmer head until you see a gap open just below screw. Insert Allen wrench in gap. Hold in on Allen wrench with one hand while turning trimmer head to the right. Reverse threads lefty tighty ,righty loosey.
Parts Used:
Arborless Bump-Feed Trimmer Head
  • Robert from WHARTON, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the BM4CSSAC
1 - 5 of 5