All Installation Instructions for General Electric Refrigerator BISB42ELE

Ice crusher was broken, putting plastic in ice.

Joe F. from Kountze, TX
Really Easy
Less than 15 mins
Screw drivers

Ordered Auger and Ice Bucket Assembly All I had to do was install 4 screws. Worked great. Thanks.Joe

Was this helpful?

no light in freezer

christopher from collegeville, PA
Really Easy
Less than 15 mins

Connected the 2 wires and pushed in the switch until it clicked.

Was this helpful?

Bucket was broken at the back where the auger turns.

Ernest from Plano, TX
Really Easy
Less than 15 mins
Screw drivers

Removed the bucket assembly from the freezer. Remove the four screws holding the front cover on the bucket. They are on the backside of the front cover. Installed the old front cover on the new ice bucket with the four screws.

Was this helpful?

My Auger was rusted, and discontinued. Had to buy complete Ice Bucket assembly.

Steve from Canyon Country, CA
Really Easy
Less than 15 mins
Screw drivers

Washed new Ice Bucket assembly with dish soap and warm water, and let dry. Removed (4) small screws holding Ice Bucket Door assemby to my original Ice Bucket assembly. Reinstalled Ice Bucket Door assembly to new Ice Bucket.

Was this helpful?

The auger in the ice bucket was rusted

Frank from Temecula, CA
Really Easy
Less than 15 mins
Screw drivers

Removed 4 screws from the old rusted ice bucket ( they hold the cover on) installed the cover and screws in the new ice bucket and installed the new unit in the freezer .

Was this helpful?

sticky switch

ANTHONY from NEW EGYPT, NJ
Really Easy
Less than 15 mins
Pliers, Screw drivers

easy pry out, disconnect wiring, connect on new switch and press in switch.

Was this helpful?

Replace Auger And Ice Assembly

GUSTAVO from CORONA, CA
Really Easy
Less than 15 mins

Just replaced the auger from the old one

Was this helpful?

The silver plating on the auger was coming loose, rusting and getting in the ice cubes.

Terry from Cocoa Beach, FL
Really Easy
Less than 15 mins
Screw drivers

All I had to do was remove four (4) screws from the old ice bucket assembly to remove the front cover and attach it with the existing screws to the new ice bucket assembly. It was a very simple repair. Thanks for the expedient delivery and the exact replacement part that I needed.

Was this helpful?

The Ice Bucket had rusted

Leticia from El Paso, TX
Really Easy
Less than 15 mins
Screw drivers

It was really simple, remove 4 screws form the old cover and put it on the new bucket. Simple, Simple!!

Was this helpful?

Rusty Auger

James R. from San Clemente, CA
Really Easy
1- 2 hours
Nutdriver, Pliers, Screw drivers

The parts recommended were exactly what I needed. The comment section on not paying attention during the removal were very helpful. I took a picture before totally taking everything apart. Thanks for the added comment.

Other Parts Used:

Ice Dispenser Bucket

Ice Bucket Auger Kit

Was this helpful?

no water to ice maker or water dispencer

craig from sweeny, TX
Really Easy
30 - 60 mins
Pliers, Screw drivers

replaced circuit board and water solenoids

Was this helpful?

BISB42ELE General Electric Refrigerator - Instructions