My Orders
BIS42AJC General Electric Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
switch wouldn't come out anymore and turn light on
-
Cynthia from Seatac, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems
... Read more
that they all use the same switches. Very Very easy
Read less
Was this helpful?
Thank you for voting!
sticky switch
-
ANTHONY from NEW EGYPT, NJ
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
easy pry out, disconnect wiring, connect on new switch and press in switch.
Was this helpful?
Thank you for voting!
The Ice Bucket was misssing from a Rental Unit .
-
FRANTZ from PLANTATION, FL
- Really Easy
- Less than 15 mins
I just put the Ice Bucket under the Ice Maker.Problem solved.
Was this helpful?
Thank you for voting!
light switch quit working
-
David from Simpsonville, SC
- Easy
- Less than 15 mins
-
Screw drivers
removed the inside fridge electrical panel and swapped switches
Was this helpful?
Thank you for voting!
failed light switch
-
Jules from Crowley, LA
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.
Was this helpful?
Thank you for voting!