BF18PH2 Frigidaire Dishwasher - Parts

The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is mad...Read moree of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.

The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. Replacing the nut is an easy job, does not require any specialty tools, and should not take you more than 10 minutes. For our step by step gu...Read moreide, click the video below. The brass nut measures 7 inches in length x 1 inch in width x 5 inches in height, and fits most dishwashers. To see if this part is compatible with your dishwasher, check the list of compatible brands below.

This grommet is used in a number of household appliances. Most often it is used in the dishwasher as part of the assembly that mounts and holds the heating element in place. This replacement part is made out of rubber, which helps create a seal between the element and the appliance. This grommet is sold individually. If you are replacing ...Read morethe heating element, or the brass nut that holds it in place, we recommend you replace the grommet at the same time. Before you begin any repair work on your dishwasher, make sure you have unplugged it and shut off the water supply.

This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and is chrome-colored. The shoulder screw measures to be less than an inch long, and has a flat bottom and top. In general screws are typically...Read more made of metal, and the purpose of them is to be used as a fastener when attaching one piece/part to another. This model is sold individually.

Sold individually.

This white rinse aid cap is a little over two inches long. It comes with a black rubber gasket, and is used for some dishwashers.

This detergent cup repair kit comes with the cam, spring and o-ring.

This pump motor shaft seal will help prevent the water inside the dishwasher from leaking around the shaft of the motor.

This is a pump motor, or single speed motor, and it works with your dishwasher. The motor pumps water to the spray arms, which is an important step because the spray arms will then use the water to clean the dishes during the cycle. Take note that this dishwasher motor does not include the seal kit or the relay kit. These kits will have t...Read moreo be purchased separately. You should disconnect the power to your appliance before servicing.