B742 (2005-07) Bluebird Aerator - Parts

This is a genuine OEM bearing which is designed for use with lawn and garden equipment and is sold individually. Made of high-quality metal and measuring at a 1-inch inner-diameter, this bearing will likely need to be replaced often because it is a high-wear part. This bearing is used to distribute weight evenly using small inner balls wi...Read morethin the bearing itself, and the locking collar fastens the bearing onto the shaft to reduce movement from motor vibrations. If you are unsure of how many bearings your equipment will need, make sure to check any available diagrams.

This steel bearing is an OEM replacement for aerators and has a .75-inch inner-diameter. Bearings have tiny balls within them which are used to distribute weight evenly and minimize friction between two moving parts. It is sold individually but comes with a .75-inch inner-diameter locking collar as well, although a stamping kit is sold se...Read moreparately. The locking collar is used to tighten the bearing on the shaft, to reduce the effects of vibrations during operation, like slipping. It is made of high-quality metal but is considered a high-wear part meaning it will likely need to be replaced often.

This V-Belt is sourced directly from Bluebird for use in Aerators. It is responsible for driving the jack shaft, is made of black rubber, and is sold individually. When it is wearing or broken, it will slip on the shafts or will be no transfer of power to the drive pulley. Inspect the belt for signs or wear or damage, replacing if necessary. Customers rate the difficulty of this repair as Medium.

This authentic manufacturer-sourced Spring is designed for use in many models of Bluebird aerators and is used to pull the clutch cable back into position after use. It is made of metal and sold individually. If you are no longer able to control the clutch, you may need to replace the Spring. Inspect it for signs of fatigue or damage and ...Read morereplace it if necessary. You will need a pair of pliers to complete this repair.Customers rate this repair as Easy.

This is an original Bluebird replacement part. The tines are commonly found in aerators. This is a set of six metal tines, which are held between the roto plates and run along the ground to aerate the turf. You will require a wrench when replacing this item.