This genuine Bosch water filter is used to help reduce contaminants in the water supply including chlorine and lead. The water filter measures approximately 2 inches in diameter and is 9 inches long. It is recommended by the manufacturer to replace the water filter every 6 months for best performance.
This is the replacement door bin or door tray for your refrigerator. It is made of white and clear plastic and is approximately 15 inches wide, 5 inches tall, and 8 inches deep. The door bin attaches to the refrigerator door and is used to store food. The main reason to replace the door bin is if the current bin is broken or missing. To c...Read moreomplete this repair, simply snap the old bin out of the door, and replace it with the new bin. This part is sold individually and is an OEM part.
This sensor monitors critical environmental or internal conditions?such as temperature moisture or system activity?to ensure accurate and safe appliance operation. When the original sensor fails the appliance may exhibit incorrect readings or irregular performance. This replacement restores precise monitoring stable functionality and improved system efficiency.
This ice maker assembly is responsible for producing and dispensing ice in refrigerators. It is supplied by the original manufacturer and is located within the freezer compartment. The assembly includes the ice maker unit, ice mold, water inlet valve, shut off lever, and wire connectors. The ice maker assembly can fail due to several reas...Read moreons which include an electrical fault, malfunctioning motor, faulty water inlet valve, clogged ice mold, or broken lever. If your refrigerator is not producing/dispensing ice, and there are no water supply issues, or blockages in the outlet tubing or fill cup, you will likely need to replace this assembly. Remove the assembly mounting screws and disconnect the water supply line. Pull the faulty assembly out of the compartment and attach the new one. Reconnect the water supply line and reinstall the fasteners.
PER FACTORY THIS NEW STYLE ICEMAKER WILL HAVE A SENSOR
INSTEAD OF A BAIL ARM 04/2021KC
This fan motor is a replacement drive component designed to power airflow movement during operation. It helps regulate temperature and ventilation and is commonly replaced when airflow weakens or abnormal noise develops.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce - For model number B26FT50SNS
November 4, 2022
Where is the water inlet valve located on this fridge?
Hi Bruce,
Thank you for your question. The water inlet valve/magnet will be found behind the refrigerator at the bottom in the area where the compressor is. The part number listed under your model number for the water inlet valve/magnet is PS8731061. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Margaret - For model number B26FT50SNS
October 13, 2023
How can I get a replacement filter?
Hello Margaret, thank you for your question! The water filter for your model is part number PS16556076. If you need help placing an order, customer service is open 7 days a week!
How to access ice in ice maker. How to remove cover?
How to remove shelf attached to side of ice maker
Hi Maggie, thank you for reaching out. To access the ice, make sure to shut off the water supply to the appliance a few hours before disconnecting the ice maker. Press the release button and remove the ice cube container. Then, press the button for 3 seconds (LED lamp is off) behind the ice cube container - the ice maker is deactivated. Empty and clean out the ice cube container. Push the ice cube container all the way back onto the supports until it locks into position. Then press the button again for 3 seconds to reactivate the ice maker. To remove the glass shelf, lift up and pull the shelf toward you. Unhook and then remove the shelf. We hope this helps.
Was this helpful?
Thank you for voting!
Matthew - For model number B26FT50SNS
November 30, 2024
Why won't fridge get cold
Hello Matthew, thank you for your inquiry. There are several causes for a refrigerator that doesn't cool, including dirty condenser coils, poor ventilation, and worn Door Gasket PS8701626. You can use a Cleaning Brush PS1817576 to clean the condenser coils. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door bin on right door interior was cracked
14 of 17 peoplefound this instruction helpful.
Gregory from STROUDSBURG, PA
Very Easy
Less than 15 mins
Replaced with same door bin and it fit perfectly Exact part was perchased and it’s just as new.
Was this helpful?
Thank you for voting!
Water filter needed replacement
4 of 14 peoplefound this instruction helpful.
Louise from PLYMOUTH, MI
Very Easy
Less than 15 mins
I mistakenly ordered the wrong part number online and the filter was too big. I called Part Select and the gentleman knew the correct part number and sent it. I also received directions for returning the incorrect part.