B20CS81SNS-01 Bosch Refrigerator - Parts

The trays and door shelves within a refrigerator are used to hold food, drinks, condiments and whatever else you may need them to hold. This plastic tray, also known as a door shelf/bin is designed for use within refrigerators and measures approximately 15.5-inches long and 4.5-inches deep. If the shelves within your refrigerator are crac...Read moreked, damaged or discolored and no longer match the color of the interior of your appliance, this shelf bin can easily replace the old bin, by simply removing the old one out of its grooves and hooking the new one in.

This water filter is an OEM replacement filter designed for use in refrigerators. It has a length of 8.75 inches and a diameter of 2.5 inches. It is responsible for filtering and purifying the water that comes from the water and ice dispenser. It removes contaminants, such as dirt, rust, and harmful chemicals, which ensures that your wate...Read morer is clean and safe for consumption. If you have noticed an unpleasant taste/smell in your water, leaking water in the refrigerator, and problems with dispensing ice/water, the filter is likely either clogged, or worn down and in need of replacement. It is recommended to replace the filter every 6 months for optimal performance. Before you begin this repair, ensure that the water supply is turned off. Remove the old filter from the filter housing, insert the new filter in and lock it in place. Run the water through the dispenser to remove air bubbles and ensure the filter is working properly.

This ice maker is a genuine OEM replacement part for refrigerators. The outer housing, measuring 14 inches by 8 inches, is white in color and made of plastic. The ice maker is in the freezer compartment and works alongside the motor and water valve to freeze water into ice cubes and dispense them as needed. If you are having difficulties ...Read moremaking and dispensing ice, hearing unusual noises, or you notice leaking water, the ice maker is likely in need of replacement. These issues can be caused by a build-up of ice in the ice mold or the ice dispenser, physical damage, or general wear and tear from operation. Remove the fasteners securing the faulty icemaker in the freezer and disconnect the wiring harness and water supply line. Place the new ice maker in position and reconnect the wiring harness and water supply line before securing it with the appropriate screws/brackets. Once you are done with the repair, test the ice maker by giving it time to cycle and produce ice.

This is a plastic flap with a spring and hinge designed for use within freezers and ice compartments in refrigerators and is a genuine OEM part. This flap controls the amount of ice that is dispensed from the ice compartment and is attached with a wire to the control board. You may need to replace this flap due to sanitation issues or mec...Read morehanical issues where the flap is stuck or damaged. This flap is sold as an individual part and will only require a flathead and Phillips-head screwdriver to replace. To replace it, disconnect the appliance from the wall outlet and access the ice compartment and use your Phillips-head screwdriver to remove the electronic control board. After the control board is removed, use your flathead screwdriver to disconnect and remove the old flap before replacing it with the new one and connecting that one with the control board, before reassembling the entire compartment.