AYP912 Husqvarna - Parts

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman lawn tractors. The blade bolt is used to secure the mulching blade. In order to replace the bolt, a socket wrench will be needed to remove the bolt from the mulching blade. This part is made of metal and is sold individually.

This replacement mulching blade is supplied directly from original equipment manufacturer for use with riding lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces. This makes the grass clippings a better mulch that will decompose quicker releasing their nutrients into the soil. This blade is made from durable metal and it is sold individually.

This is a genuine replacement V-belt sourced directly from the original manufacturer, commonly used in a variety of lawn mower models. Made from durable rubber, this belt is responsible for driving the mower blades, making it a critical component for proper cutting performance. It is sold individually and should be replaced when worn, cra...Read morecked, or stretched to maintain optimal operation. Before installing the new belt, it’s important to clean the pulleys to ensure smooth performance and extend the belt’s lifespan. A set of wrenches is required to complete the installation. Regular inspection and timely replacement of the V-belt help keep your mower running efficiently season after season.

This is an OEM replacement part sourced directly from the original manufacturer. This Mandrel Housing is made out of Metal and it is Sold Individually. This is the part that Houses Shaft that mower blade attaches to, it is mounted to the deck of the mower by Three (3) Bolts (Sold Separately). Please note that the mounting holes on Mandre...Read morel Housing are not threaded. Bolts that are used to secure the Mandrel to the deck are self tapping. When doing this repair you would need a set of Wrenches. • First remove the Blade from the Mandrel Shaft • Remove the Three (3) Screws that are holding Housing to the Deck • Then, you will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. • Remove Shaft from the old Housing and place it in the new housing. Re-attach the now Complete Mandrel Assembly back to the deck. • Attach pulleys, belts and blades.

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered, Poulan and Ryobi. This part allows the rod to swivel smoothly when the wheels are turning. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.

The washer goes between the center lock nut and the steering wheel. This item is available as an individual replacement part. It is an OEM from Poulan, Husqvarna, and Weed Eater for use in lawn tractors and ride mowers. When replacing this item a wrench might be required during the installation process. This part is made out of metal and will need to be replaced if it bends or breaks.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.

This nylon bearing is a genuine OEM part used for various makes and models of tractors and lawn mowers and is sold as an individual part. Measuring 0.5-inches tall, this bearing is used to secure the roll pin to the pedal cover and will require a wrench when you replace it.

This is a genuine OEM replacement part that is used for lawn mowers and tractors across a number of brands. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to remove or install this bolt.

Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

This item is available as an individual replacement part. The knob attaches to the shift rod and is made out of plastic. During replacement, no tools should be needed to install this part correctly. It will require replacing if it breaks or strips. This genuine item is supplied by the original equipment manufacturer for use with tractors and lawn mowers made by Poulan, Husqvarna, Weed Eater, and Jonsered.

This is a genuine OEM sourced replacement part that is intended to be used with tillers and lawn tractors from Poulan, Husqvarna, Weed Eater, and Jonsered. The metal hex nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. The nut is sold as an individual replacement part.