AYP718 Husqvarna - Parts

This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller pieces. This provides natural mulch for your lawn since smaller clippings will decompose quicker, releasing their nutrients into the soil. It...Read more is made out of metal and it is sold individually. To install this mulch blade you would need a socket wrench. • Park the riding lawnmower on a flat surface such as a garage floor or a driveway • Disengage blades by pulling the cutting deck lever fully to the disengaged position • Set the riding lawnmower cutting deck to the highest position to access blades • Unscrew the blade bolt • Remove old blade and secure a new one in place • Reassemble in reverse order and test your new blade

It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is a high-quality replacement for a missing or a faulty spring that was installed on a new unit. The purpose of this component is to apply tension on the guard allowing it to retract, please make sure to refe...Read morer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine OEM replacement part, sold individually. V-belt drive systems, also called friction drives (because power is transmitted as a result of the belt's adherence to the pulley) transmit power from a drive to a driven shaft. They are easy to install, require no lubrication, and dampen shock load. It is compatible with the mowers and lawn tractors listed below.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman lawn tractors. The blade bolt is used to secure the mulching blade. In order to replace the bolt, a socket wrench will be needed to remove the bolt from the mulching blade. This part is made of metal and is sold individually.

This is a genuine replacement V-belt sourced directly from the original manufacturer, commonly used in a variety of lawn mower models. Made from durable rubber, this belt is responsible for driving the mower blades, making it a critical component for proper cutting performance. It is sold individually and should be replaced when worn, cra...Read morecked, or stretched to maintain optimal operation. Before installing the new belt, it’s important to clean the pulleys to ensure smooth performance and extend the belt’s lifespan. A set of wrenches is required to complete the installation. Regular inspection and timely replacement of the V-belt help keep your mower running efficiently season after season.

This is an OEM replacement part sourced directly from the original manufacturer. This Mandrel Housing is made out of Metal and it is Sold Individually. This is the part that Houses Shaft that mower blade attaches to, it is mounted to the deck of the mower by Three (3) Bolts (Sold Separately). Please note that the mounting holes on Mandre...Read morel Housing are not threaded. Bolts that are used to secure the Mandrel to the deck are self tapping. When doing this repair you would need a set of Wrenches. • First remove the Blade from the Mandrel Shaft • Remove the Three (3) Screws that are holding Housing to the Deck • Then, you will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. • Remove Shaft from the old Housing and place it in the new housing. Re-attach the now Complete Mandrel Assembly back to the deck. • Attach pulleys, belts and blades.

This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Weedeater, Poulan and Tecumsen. This part will apply pressure on the brake pad and dowel pins when the brake is being used to the stop tractor. It is recommended to review your models diagram to verify the parts compatibility. This break lever is sold individually and made of metal.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Craftsman lawn and garden equipment. This is an identical replacement for a missing or a faulty tractor lift assembly link that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this component. This high-quality assembly is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered, Poulan and Ryobi. This part allows the rod to swivel smoothly when the wheels are turning. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.

The washer goes between the center lock nut and the steering wheel. This item is available as an individual replacement part. It is an OEM from Poulan, Husqvarna, and Weed Eater for use in lawn tractors and ride mowers. When replacing this item a wrench might be required during the installation process. This part is made out of metal and will need to be replaced if it bends or breaks.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.