EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ATG173NLD1 Frigidaire Refrigerator - Instructions

All Instructions for the ATG173NLD1
91 - 105 of 212

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer built ice, fridge not cold enough and running constantly.
1 of 4 people found this instruction helpful.
  • LUIS from CENTENNIAL, CO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
Was this helpful?
Thank you for voting!
both end caps broke
0 of 1 people found this instruction helpful.
  • Rita from Verona, PA
  • Really Easy
  • Less than 15 mins
Door panel was already off. Took off broken caps, placed new ones on & put back on door.
Was this helpful?
Thank you for voting!
freezer worked frig was warm. Ice maker is still not working
0 of 1 people found this instruction helpful.
  • steve from Kirkland, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall
Was this helpful?
Thank you for voting!
loud noise fan blade broke,off balance
0 of 1 people found this instruction helpful.
  • EDWIN from ELWOOD, IN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this helpful?
Thank you for voting!
Freezer okay, but fridge was warm
0 of 1 people found this instruction helpful.
  • brad from minneapolis, MN
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Website was great!

The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.

To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
Was this helpful?
Thank you for voting!
coil Iceing up
0 of 2 people found this instruction helpful.
  • Thomas from Stuart, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
took 4 screws out of the discharge vent on top of the refrigerator section and unpluged the wiring harness and put the section on the counter and unscrewed the timer and put the new one in and reinstalled the assembly and plugged the Jack and put the 4 screws back in, and rotated the timer and put it on defrost removed the back and check the heaters and drain .
Was this helpful?
Thank you for voting!
leaking water down into fridge
0 of 2 people found this instruction helpful.
  • Ronald from Defiance, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
just like the video showed...it was excellent!!!
Was this helpful?
Thank you for voting!
One broken retainer bar, and 4 broken brackets
2 of 8 people found this instruction helpful.
  • Richard from El Cajon, CA
  • Really Easy
  • 15 - 30 mins
cut the retainer bar to proper lengh, put on the
end caps of both bars in question and snapped them both into place.
Was this helpful?
Thank you for voting!
Door shelf end cap broke
0 of 2 people found this instruction helpful.
  • Judith from Lewisburg, PA
  • Really Easy
  • Less than 15 mins
We just put the new end parts into the door and then placed the bar inside the caps. We had contacted our appliance dealer at least three times to get parts for us but to no avail. A friend told me about your website and the rest was history ----- and easy. Thank you.
Was this helpful?
Thank you for voting!
Getting the light socket to snap back in properly
1 of 5 people found this instruction helpful.
  • Robert from HELENA, AL
  • A Bit Difficult
  • Less than 15 mins
  • Screw drivers
It snapped in place.
Was this helpful?
Thank you for voting!
broken shelf bar with missing end brackets.
0 of 2 people found this instruction helpful.
  • Robert from Oconomowoc, WI
  • Really Easy
  • Less than 15 mins
Ordered the parts from the product discription (photo) as well as chart showing actual size. Got the parts( in two separate shipments) cut the bar to length and snapped them inot place. Bingo!
Was this helpful?
Thank you for voting!
bottom door shelf, both end caps broken off
0 of 2 people found this instruction helpful.
  • Lance from Blaine, WA
  • Really Easy
  • Less than 15 mins
put both end caps on metal guard,put back on door,push down to lock into place. 30 second repair,
Was this helpful?
Thank you for voting!
freezer was freezing and no refrigerator
  • Michael E from Uniontown, PA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Followed instruction vedeo from partselect. THANKS!!!!!
Was this helpful?
Thank you for voting!
frig side not cool/freezer coils not defrosting
  • daryl from n.las vegas, NV
  • Really Easy
  • Less than 15 mins
unplugged frig,removed bottom front cover and loosend 2 screws at bottom front left and slid defrost timer out from behind metal panel,unplugged the old and plugged in the new.frig works great.
Was this helpful?
Thank you for voting!
fit was perfect
  • John from White city, OR
  • Really Easy
  • Less than 15 mins
replaced broken end cap
Was this helpful?
Thank you for voting!
All Instructions for the ATG173NLD1
91 - 105 of 212