My Orders
ATC150WKW2 Frigidaire Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cross bar end caps were broken.
0 of 1 people
found this instruction helpful.
I put the end caps on the cross bar and reinstalled it in the fridge. Easy job.
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken End Caps On Center Door Shelf
0 of 1 people
found this instruction helpful.
I removed the broken end caps by hand. They snap in to the center retainer bar. I ordered replacement parts from part select on their website. New end caps arrived in a couple of days. I installed new caps. No tools needed. Great service by part select. Thank you tm
... Read more
staten island ny
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
plastic brackets that hold rack were broken in refrigerator door
1 of 4 people
found this instruction helpful.
The new parts just popped right into the holes and the door now has two shelves again.
Other Parts Used:
Was this helpful?
Thank you for voting!
W/O End Caps Nothing Will Stay On Shelf
0 of 1 people
found this instruction helpful.
First, I should tell you I break more things than I fix by trying to install wrong or tightening until broken. It may seem real easy to to put end caps on but there was a suprised look on my wife's face when she watched me put them on the first time. She made me some chocolate chip cookies to celebrate. I ordered the parts and recei
... Read more
ved them the next day. I shopped local and and was quoted up to five times the price nobody had them in stock.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
both end caps broke
0 of 1 people
found this instruction helpful.
Door panel was already off. Took off broken caps, placed new ones on & put back on door.
Other Parts Used:
Was this helpful?
Thank you for voting!
bottom door shelf, both end caps broken off
0 of 2 people
found this instruction helpful.
put both end caps on metal guard,put back on door,push down to lock into place. 30 second repair,
Other Parts Used:
Was this helpful?
Thank you for voting!
shelf end caps both broke and the rack came off
inserted shelf caps into rack strip then into openings and hit them with my fist (gently) till they 'seated' and locked
Other Parts Used:
Was this helpful?
Thank you for voting!
My Frig Light Stopped
I am a 65 year old woman with no mechanical aptitude: I just unplugged the frig. And used a screw driver to pry of the plastic socket from its outside edge. . Then you just unplug two tiny contact plugs that appear when you pull out the socket and replug in those two the same way on the new part. Pop the socket back into the hole . .
... Read more
. . And screw in the new bulb. I knew I needed the socket part cause when the bulb burned out , a new bulb still did not work. . . If I can do it, anyone can!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
The end caps for the door shelves had broken
The repair was very easy. I had to squeeze the ends of the door shelf in a bit with pliers since the shape of the new end caps was slightly smaller than the shelf bar. BUT - here is the most important part. I had gone to a parts replacement store where I was quoted the price of $18.00 EACH for the end caps. Yes, $18.00 each!! With Part
... Read more
Select, I paid less than that for the 2 caps including shipping - $15.42 total. Thank you, PartSelect.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
End cap clips broke
You just slide off the broken part and replace it with a new part. I had to make a slight adjustment to the end of the shelf rail to allow the new piece to properly mate with the old shelf rail.
Other Parts Used:
Was this helpful?
Thank you for voting!
door shelf end cap hooks broken
Previously I glued them on with epoxy and Taped them. Often redoing. So I needed to clean the surface with goo gone. And to clean out the slots I used a utility knife. I had a small bump on the new end cap so I removed it with the utility knife. Simply put the end caps on the rail on each end. Then put the hooks in the slots and slide dow
... Read more
nward until it is secure. I should have thought of parts before! When the rail broke off I had cherries in a jar on that shelf. It crashed to the floor. I had a sticky mess every where.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
I inherited this old refrigerator as part of the space where I now live. I found the bottom shelf bar for the door tucked away under the sink, but there were no brackets. I'm sure they were broken and discarded at some earlier time.
I snapped the brackets into the ends of the shelf bar, then inserted them into the holes in the door and pulled down each end until it snapped in place.
Other Parts Used:
Was this helpful?
Thank you for voting!