AT23 Admiral Refrigerator - Parts

NOTE: This clip is sold individually. Two of these clips are required per kickplate. This part is required to hold your kickplate in place.

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

This is the cover to the bottom hinge on your appliance. Sold individually.

Sold Individually. This screw holds the handle in place on the freezer door.

A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it shou...Read moreld be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.