EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ASI2575GRW02 Maytag Refrigerator - Instructions

All Instructions for the ASI2575GRW02
76 - 90 of 301

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
changed the light bulb still would not work so I figured it was the switch sure enough.
3 of 4 people found this instruction helpful.
  • anthony from HAVELOCK, NC
  • Really Easy
  • 15 - 30 mins
I took a chance and ordered a switch that is next to the top of the door. looked for how to remove it easily done in ten minutes works fine last long time.
Was this helpful?
Thank you for voting!
Shelf was broken on one side.
3 of 4 people found this instruction helpful.
  • Tammy from SHERMAN, TX
  • Very Easy
  • Less than 15 mins
The repair was super easy. It took all of 10 seconds. From ordering the part to repair, I would use part select 100%! Excellent company with excellent parts. Thank you!
Was this helpful?
Thank you for voting!
Ice deflector had broken.
2 of 2 people found this instruction helpful.
  • Thomas from JACKSONVILLE, NC
  • Very Easy
  • Less than 15 mins
  • Screw drivers, Socket set
Removed ice tray and unbolted front cover. Removed broken piece and snapped new ice deflector in place. Reinstalled front cover and put ice tray back into freezer. Cycled crushed ice, works great!
Was this helpful?
Thank you for voting!
fan motor needed replacing
2 of 2 people found this instruction helpful.
  • Joe from ALBANY, GA
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
System not cooling. removed back cover and notice fan not rotating. Looked up unit and found diagram. Ordered motor which was received in less than 5 business days.
Replacement was super easy. Just unscrewed from frame, pulled off fan, put fan on new motor and remounted back in frame. Took 10 minutes tops.
Was this helpful?
Thank you for voting!
Loud banging after using water dispenser
2 of 2 people found this instruction helpful.
  • Matthew from RANDOLPH, NJ
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Followed the extremely helpful video on the web site. It was easy to remove, replace, and install the new part, following their video. Saved time and money, and I didn’t lose anymore of my hair!
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people found this instruction helpful.
  • dorotea from staten island, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people found this instruction helpful.
  • Thomas from Roseville, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people found this instruction helpful.
  • stu from richmond, VA
  • Easy
  • Less than 15 mins
  • Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
Replacing the bulb in the freezer side
5 of 11 people found this instruction helpful.
  • Yafa (and David) from Bothell, WA
  • Easy
  • Less than 15 mins
  • Nutdriver
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.
Was this helpful?
Thank you for voting!
Replaced door gasket and hinge closers on Refrigerator door.
2 of 2 people found this instruction helpful.
  • David E from EL SOBRANTE, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Socket set
I just followed the excellent Video for both parts. The door gasket is tedious but doable, just take a deep breath and press on. Putty knife is handy to push edge of gasket under the plastic lip. The closer devices take 3 minutes - simple R&R. Check the videos - they're pretty clear and detailed.
Was this helpful?
Thank you for voting!
Replace water filter
4 of 8 people found this instruction helpful.
  • Jeanne from COSTA MESA, CA
  • Really Easy
  • 30 - 60 mins
Open door and from appliance instruction book
Replace filter
Was this helpful?
Thank you for voting!
There was no water in the icemaker tray to freeze into ice cubes
3 of 5 people found this instruction helpful.
  • Thomas from GRANT, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Took off the rear cardboard cover, unscrewed the old valve, checked to see if there was enough tubing to fit if I cut the tubing. removed the 2 electric connectors, Cut the tubing 3, installed the 2 electric plugs, inserted the 3 tubes, mounted the new valve, replaced the cardboard cover. I checked for leaks, and very soon heard the valve filling the icemaker tray, and soon, Ice cubes again.
Was this helpful?
Thank you for voting!
Freezer ice maker not dispensing ice.
2 of 2 people found this instruction helpful.
  • Johnny from MORGAN CITY, LA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Ordered Ice Bin Auger and changed with no problem. Found how to change on YouTube and followed video.
Was this helpful?
Thank you for voting!
Ice maker leaking
3 of 5 people found this instruction helpful.
  • Clifford from WASHINGTON, DC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Unplugged freezer turned off water removed 3 nut screws Unplugged old ice maker installed new ice maker
Was this helpful?
Thank you for voting!
No ice making.
2 of 3 people found this instruction helpful.
  • Joseph from EDEN, NC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Took old ice maker out; put in new ice maker.
Was this helpful?
Thank you for voting!
All Instructions for the ASI2575GRW02
76 - 90 of 301