AS27 - Parts

Sold Individually.

Sold individually.

This screw is less than an inch long, and is made entirely of metal. It is used for the roller of many Maytag brand refrigerators.

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispen...Read moresing ice, there could be an issue with the thermostat. Before you begin this repair, make sure the power is disconnected from your refrigerator, and that any food that may spoil is safely stored. This is an OEM part and is sourced directly from the manufacturer. This thermostat is sold individually, and comes with two attachment clips.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.

This drive ring is three inches in diameter. It is all white in color and is made of plastic. This ring is used with a refrigeraor's icemaker assembly.

Sold Individually. - * Part may differ in appearance, but functions same as original.

This door strike is located within the mechanical components if the ice and water dispenser. With the help of the solenoid, this piece opens and closes the ice dispenser door.

Sold individually.

This part supplies water to refrigerator components that require water, such as the ice maker and water dispenser. If you notice a leak coming from your refrigerator, the plastic tubing that feeds your water and ice dispenser might need to be replaced. This part is made of clear plastic and is 1/4 inch thick, and 8 1/2 feet long. Make sur...Read moree to disconnect power to the refrigerator and shut off the water supply prior to installing this part. Safely store any perishable food items that could deteriorate while the power to the refrigerator is disconnected. Work gloves are recommended to protect your hands during this installation.

This dispenser grille is located on the bottom of the ice/water dispenser.