AS13 - Parts

This part fits inside your range's terminal block to act as an insulator for the contact spade.

Sold individually.

This is a bulb clip, also known as a sensor clip or bulb holder, which is designed to hold the thermostat bulb in place within the interior of various models of ovens. This clip is made of metal, measures approximately 1-inch in length and is a genuine OEM part, but is sold by itself and without the thermostat itself. The thermostat bulb,...Read more also known as a capillary thermostat, is used to measure the interior temperature of the oven during operation, and this clip secures it. If you notice your oven heats unevenly, too little or too much, this clip may be rusted, broken or damaged and causing the thermostat bulb to not detect the internal temperature properly. To replace this clip, you will likely need your user manual and a screwdriver and/or wrench. You will first need to disconnect your oven from the wall outlet and remove it from the wall. Use your user manual to locate the thermostat and use your screwdriver and/or wrench to remove the panel covering it. Here, you can likely replace the old clip with the new one, and then reassemble your oven.

If your air conditioner is making an unusual noise, the problem could be with the blower wheel, or its fans. The motorized fan in an air conditioner pulls air through the filter and over the cold evaporator coils and then re-circulates the cooled air back into the room. There is also a second fan on the motor shaft that cools the condense...Read morer coils at the back. An unusual noise is usually due to the fans striking the inside of the air conditioner. Check your blower wheel, and the fan blades for physical damage, dust, and signs that they have been hitting something during the cooling process. If the wheel is damaged and the unit is not working properly because of it, replace the part right away. Remember, the power should be disconnected from the air conditioner before you perform this repair.