Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Not getting cold
3 of 4 peoplefound this instruction helpful.
John from PHILADELPHIA, PA
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers
Followed instructions on your website
Was this helpful?
Thank you for voting!
lost hinge to door while moving
4 of 7 peoplefound this instruction helpful.
Madonna from Washington, NJ
Really Easy
Less than 15 mins
Screw drivers
Just put the hinge on and screwed on
Was this helpful?
Thank you for voting!
Broken Refrigerator door retainer
2 of 2 peoplefound this instruction helpful.
Leroy from IRVINGTON, AL
Very Easy
Less than 15 mins
This job was extremely easy, snap on.
Was this helpful?
Thank you for voting!
Original crisper drawer broke
2 of 2 peoplefound this instruction helpful.
Samantha from JUNCTION CITY, KS
Very Easy
Less than 15 mins
Since the original drawer sides had broken off the repair was very easy. I threw the old one in the trash and inserted the new drawer in its place. The fit was perfect and I have had no issues at all. The delivery was rather speedy also. Very happy!!
Was this helpful?
Thank you for voting!
My fridge was very warm Temperature was 56 and my son did the work on it for me
2 of 2 peoplefound this instruction helpful.
Rosemary from ALBION, NY
Really Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)
My son said it was easy to put in the motor I didn’t need the fan my fan was in good shape yet thank you so much for everything
Was this helpful?
Thank you for voting!
Refrigerator suddenly not staying cold. Freezer icing up about 1 month before.
2 of 2 peoplefound this instruction helpful.
PAUL from SANTA MARIA, CA
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers
Noticed the evaporator fan not spinning but would spin with a finger jump start. After looking up the part on the PartSelect liner parts diagram I found the installation video that really helped. After installing the fan it tested out fantastic. The fan was blowing air 10 times more than the old one. Refrigerator works great on the origin
... Read moreal econo setting.
****Make are you order Capacitor & Starter relay too (we ordered separtely so had to pay shipping twice)**** Super easy just open access panel on back near compressor and remove retention clip with fingers, remove & replace both capacitor & starter, put clip and acce
... Read moress panel back on, plug in and allow 8 hours to cool! Works like new again! Hope it goes another 10 years
freezer became frosty but refrigerator's camera didn'thave any coll at all.
1 personfound this instruction helpful.
Yakov from BROOKLYN, NY
Really Easy
30 - 60 mins
Screw drivers, Socket set
After describing my problem PartSelect consultant emmidiately diagnost the problem and I ordered Evaporator Fan Motor. Along with purches order confirmation I got video how to install a new motor. The hardest part was to connectthe ground wire becase space in that area was verylimited. Otherwise it was just like a walk in the park.
... Read morer />As soon as I installed motor and turned on the refrigirator, everything start working properly. Thank you PartSelect, you sved me hundreds of dollars.
Read less
Was this helpful?
Thank you for voting!
Bottom part of refrigerator wasn't getting cold
1 personfound this instruction helpful.
Chad from RIDGEFIELD, NJ
Really Easy
30 - 60 mins
Pliers, Screw drivers, Socket set
$80 part motor fan replaced saved me $1000 or more on new fridge.
Called in and you guys helped out You guys are the best.
Was this helpful?
Thank you for voting!
no airflow to fresh food compartment or to freezer compartment....eveporator fan not working
1 personfound this instruction helpful.
Herbert from Pocono Lake, PA
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Remove screws on the rear wall of the freezer. Pull the rear wall out and this gives you access to the evaporator fan assembley. Remove wires to the fan and to the defrost element to be able to move the rear wall to a position where you can work on the evaporator fan motor. The fan motor is held into place by a plastic bracket that c
... Read morelips onto the reverse side of the freezer rear wall. Careful not to break the plastic clips that hold the fan in place as they are brittle. The fan blade friction fits on to the fan motor shaft and is a little difficult to remove. Assemble in reverse order.
Remove food from freezer shelf and ice maker back panel4 screws remove old motor replace with new motor reinstall all removed parts. Plug in and fan instantly came on refrigerator working great since
Was this helpful?
Thank you for voting!
Warm fridge and freezer but compressor was running. No air distribution inside fridge
1 personfound this instruction helpful.
Brian from BURTON, MI
Really Easy
15 - 30 mins
Nutdriver
I turned breaker off to fridge, it was easier than pulling fridge out in camper. I took 4 screws out of back panel that revealed the evap fan, took 2 more screws out to take fan bracket off. Unplugged fan plug. Took fan blade off the non working evap motor and put it on the new evap motor. Put all the screws back in the reverse orde
... Read morer and flipped the breaker and air started circulating.
Read less
Was this helpful?
Thank you for voting!
freezer would not freeze
1 personfound this instruction helpful.
Michael from HELENDALE, CA
A Bit Difficult
30 - 60 mins
Nutdriver, Screw drivers
inst said,"50 pct of the time this calls for new capacitor," so we changed the capacitor. Same prob. It also said,"25 pct of the time it's the bi-metal thermostat" So we ordered it. We removed the plastic rear panel from inside the freezer comp. using small nut driver. Here we found much ICE surrounding the defrost unit, three inches thic
... Read morek. We thawed the whole mess. and the freezer has worked fine ever since. I think my habit of getting ice cubes from the inside container rather than from the ice cube dispenser, had kep t the freezer door open too much, interfering with the normal defrost cycle and allowing ice to build up over time so that it finally defeated the system. My new rule, "get ice cubes only from the front."
Read less
Was this helpful?
Thank you for voting!
The light switch broke when an item fell on to the switch
1 personfound this instruction helpful.
Valerie from York, PA
Really Easy
15 - 30 mins
Following a you tube video, I followed the instructions. However, the old switch did not come out as easy as the video showed. They showed inserting the putty knife at the bottom of the switch to pop out the switch. However, in my refrigerator, the flex tab was at the top. After I inserted the putty knife at the top of the switch it c
... Read moreame out easily. I removed the broken switch and inserted the new switch with no further issues.
My Orders
