My Orders
ARR620L1 (P1138602S) Amana Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner element was not working right
0 of 1 people
found this instruction helpful.
-
Janet from Uniontown, PA
- Really Easy
- Less than 15 mins
Since it was a plug-in burner, only needed to pull it out and put the other one in.
Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.
Another thing I would like to say is that I was very well pleased with the service from partselect.com. I was unable to find the burners in my area.
Was very helpful in selecting the part and was very efficient in sending it.
Was this helpful?
Thank you for voting!
Would no longer heat up
0 of 1 people
found this instruction helpful.
-
Scott from Lakewood, OH
- Really Easy
- Less than 15 mins
Removed the old broken burner and slid the burner prongs into place. Very EASY to replace!
Was this helpful?
Thank you for voting!
Wire broken off plug in block
0 of 1 people
found this instruction helpful.
-
Robert from Phillipsburg, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed old block , cut off wires , used new wire nuts, heat shrink , supplied with parts , job done lowered range top went fishing ...
Was this helpful?
Thank you for voting!
needed to replace one burner
1 of 4 people
found this instruction helpful.
-
Donna from Carver, MA
- Really Easy
- Less than 15 mins
the part arrived in two days. Just had to remove the old one and pop in the new one and it was that easy. I was amazed at how soon the part was delivered and happy to have a working burner again.
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people
found this instruction helpful.
-
William from Schwenksville, PA
- Easy
- Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
Burner Would Not Heat
0 of 1 people
found this instruction helpful.
-
David from Toledo, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
One screw taken out, 2 wires switched, new part & screw put in. Burner like new!
Was this helpful?
Thank you for voting!
Burner sit uneven and plug in socket bad
0 of 1 people
found this instruction helpful.
-
Brenda from Charlotte, MI
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Clipped and rewired plug in socket and put new burner in
Other Parts Used:
Was this helpful?
Thank you for voting!
burner made popping sound and began shooting sparks from one of the rings
0 of 1 people
found this instruction helpful.
-
Raul from Oak Hill, FL
- Really Easy
- Less than 15 mins
extremely easy to replace the burner. I just pulled out the old burner and replaced with new one. The whole process took less than ten minutes.
Was this helpful?
Thank you for voting!
contacts had gotten burnt out/blackened with age so burner was intermittent.
0 of 1 people
found this instruction helpful.
-
john from reading, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
lifted the cover, unscrewed the ceramic wire fastners, put the new part in, and voila, job done and working perfectly
Was this helpful?
Thank you for voting!
Hole in Cooktop Burner
0 of 1 people
found this instruction helpful.
-
Sherrill from Houston, TX
- Really Easy
- Less than 15 mins
Simply removed new burner from box and plugged it in! Very pleased with 3 day speedy delivery. Confident my 32 year old cooktop will continue to give many more years of service with any parts needed from PartSelect.
Was this helpful?
Thank you for voting!
Surface Burner shorted out
0 of 1 people
found this instruction helpful.
-
Dawn from Pawnee, IL
- Really Easy
- Less than 15 mins
After finding the correct Y-frame, inches and watts in a surface burner, it was easy to just slide in the slots. Tested, and it was perfect. Now it makes all of the other burners look bad. Thanks. Your site was the only one, that I was sure I had the correct part.
Was this helpful?
Thank you for voting!
Wire broken going to one electric plug for burner
0 of 1 people
found this instruction helpful.
-
John from Shelby Township, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Replace the connector and bracket, spliced the wires, put heat to the schrink wrap and I was done.
Was this helpful?
Thank you for voting!
burner stop heating
0 of 1 people
found this instruction helpful.
-
Pastor Shelly from Sumter, SC
- Really Easy
- Less than 15 mins
pulled out old burner and pushed in new burner.
No tools needed.
No tools needed.
Was this helpful?
Thank you for voting!
no heat from burner
0 of 1 people
found this instruction helpful.
-
George from ST. Charles, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
I raised the stove top, read the instructions to my son while he did the work, then I lowered the stove top, installed the burner, and it worked like magic.
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people
found this instruction helpful.
-
Janet from Ada, MI
- Really Easy
- Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!