EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

ARR34 Amana Range - Instructions

All Instructions for the ARR34
91 - 105 of 228

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip bowls very dirty and stained
1 of 2 people found this instruction helpful.
  • john from donna, TX
  • Really Easy
  • Less than 15 mins
Remove burner elements. Remove old drip pans. Thoroughly clean stove top under drip pan edges, and under top cover. Install new drip pans. Install burner elements.
I never seem to be able to find the correct replacement drip pans at retail outlets in the quantities I need. Your parts identification, selection and ordering proces ses were simple and delivery was faster than I hed expected.
Thank you
Was this helpful?
Thank you for voting!
Old burner pan warped.burner sat at 15 degree angle.
1 of 2 people found this instruction helpful.
  • Michael from Portland, OR
  • Really Easy
  • Less than 15 mins
Removed burner and then burner pan.Then replaced pan and reinstalled burner.
Was this helpful?
Thank you for voting!
Sockets burnt out.
1 of 2 people found this instruction helpful.
  • James from Bear, DE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Repair was very east. The suppliers package had all of the necessary parts ceramic wire nuts wire Ect. Excellent.
Will buy from Part Select Appliance again.
Was this helpful?
Thank you for voting!
Element had burned out
1 of 2 people found this instruction helpful.
  • Judith from Star, ID
  • Really Easy
  • Less than 15 mins
Package arrived while I was working at the computer and my husband announced minutes later, "That's what I like to see". I didn't know what he was talking about until he tossed the packing list on my desk and said, "It works perfectly. Good Job!" It had only taken a minute to pop the new parts in and he already had water on for coffee.
Was this helpful?
Thank you for voting!
The bake element did not get hot any longer
1 of 2 people found this instruction helpful.
  • Donna from Lodi, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unscrewed the 2 screws in the back of the element. Disconnected the unit from the bake of the oven, replaced the two ends of the new element and screwed in the 2 screws. Oven works great! Took less than 5 minutes to complete.
Thank you for the FAST delivery!!
Was this helpful?
Thank you for voting!
broken end cap held by two screws
1 of 2 people found this instruction helpful.
  • WARD from WELLESLEY, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Unscrewed the old and screwed on the new.
Was this helpful?
Thank you for voting!
Something got pushed into the control panel and the end cap cracked at the screw locations.
1 of 2 people found this instruction helpful.
  • Michael from Baltimore, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the three screws, then removed the old end cap, cleaned the area, and reinstalled the new end cap, then attached with the three screws.
Was this helpful?
Thank you for voting!
Burner ceramic disintegrated & spalled
1 of 2 people found this instruction helpful.
  • Gary L from North Tonawanda, NY
  • Really Easy
  • Less than 15 mins
Pulled buner element out of socket as you would for detailed cleaning. Replaced burner element & drip pan with OEM parts. Fit was perfect, tested burner on all heat ranges, good as new.
Was this helpful?
Thank you for voting!
Large burner on stove not working
1 of 2 people found this instruction helpful.
  • Cherie from Dowagiac, MI
  • Really Easy
  • Less than 15 mins
I removed the heating element and noticed that the prongs were corroded. I looked for a model number but couldn't find it so it made it difficult to find a replacement until I got on this website. I found the replacement part and also found that as I checked for other sites for this part this company was the most resonable priced.
T he part arrived and I replaced it in seconds. Turned it on and it worked immediately. Super easy.
Was this helpful?
Thank you for voting!
Missing An Oven Rack Due To Plastic Fire In Our Oven. Plastic Melted Onto The Rack...Instead Of Taking The Time To Melt The Rest Off, My Husband Threw It Away =(
1 of 2 people found this instruction helpful.
  • Nicole from Rogers, MN
  • Really Easy
  • Less than 15 mins
Bought a new one. . Three years later =)
Was this helpful?
Thank you for voting!
oven bake element blown
1 of 2 people found this instruction helpful.
  • Rosemary from Newport News, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I read up about the repair on the internet and what it entailed, thought I could do it. So followed directions from the internet after looking up Ammana, model number and serial number, and ordered the part from Part Select.com. It arrived two days later, was really impressed with their business handling of it.
I paid particular att ention to disconnecting the power and pulling the plug out of the wall as double insurance to not getting electrocuted.
The Installation was quite simple, just pull the old one out and put the new one in. I took note of how the old one came out, and connected the new one in the same fashion, and it works wonderfully, just heated right up. It was a good experience.
Was this helpful?
Thank you for voting!
Just needed new drip pans for burners
1 of 2 people found this instruction helpful.
  • Ann from Cadiz, KY
  • Really Easy
  • Less than 15 mins
Was glad to get the correct ones for a 30 year old stove. Had already wasted $12 shipping trying to order from someone else.
Was this helpful?
Thank you for voting!
Stove Burner wouldn't heat up
1 of 2 people found this instruction helpful.
  • Donna from Sandwich, MA
  • Really Easy
  • Less than 15 mins
Someone did the repair for me.
Was this helpful?
Thank you for voting!
Bake Element Died
1 of 2 people found this instruction helpful.
  • Kimberly from Farmington, MI
  • Easy
  • Less than 15 mins
  • Pliers
Had to use wd-40 to get the old part loose (oven is over 15 years old) and used pliers to pull apart from the oven. Replaced with the new part and works great. . . Once I used the wd-40 to loosen, it was super easy.
Was this helpful?
Thank you for voting!
Replace oven racks
2 of 5 people found this instruction helpful.
  • Gregory from Davenport, IA
  • Really Easy
  • Less than 15 mins
Very simple process of just ensuring you have the correct size racks and remove the old racks and replace them with the new ones.
Having ordered a lot of things on the internet, I am very pleased with using Part select and would "highly" recommend them to all!!
Was this helpful?
Thank you for voting!
All Instructions for the ARR34
91 - 105 of 228