ARG71 Amana Range - Parts

This right side back guard end cap is used for many ranges. It is all black in color and it is made entirely of plastic.

This oven light assembly is a little over four inches long and comes with the lens and 660-watt light bulb. Make sure your appliance is unplugged or circuit breaker is off before installing this new part. It is located inside the oven and may need to be replaced if the socket has failed, causing the light to not come on inside the oven. I...Read moret may also need to be replaced if you notice that the glass is broken and the whole assembly needs to be replaced. The part is located in the upper right hand side of the oven. To reach the bulb you will need to open the oven door and remove the upper rack.

The hinge kit, or oven door hinge, is used in ranges and wall ovens. The hinge attaches to the right side of the door and controls how fast the door opens. At a specific angle, it allows the door to remain open. If you are having trouble opening and closing your door, or it does not close at all, replacing the hinge could solve your probl...Read moreem. The hinge is made from metal and the kit comes with the hardware needed for this installation. You will need a screwdriver to perform this repair. *Please note: This part is only for the right side of your appliance. The left side is sold separately.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

Also known as a roller.

This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.

The size of this burner cap is actually 2.5" to 2.75 inches in diameter.