ARB8 Amana Refrigerator - Parts

This is an evaporator fan motor, it is 115 volts and 60 hertz and it is for your refrigerator/freezer. You will need to replace this part if your appliance is too warm or getting noisy. This evaporator fan motor is located in the back of the freezer. This part circulates air over the refrigerator coils. These coils will convert the heat i...Read morento cool air, which is then circulated throughout your appliance. To replace this part you will need a 1/4-inch nut driver and a pair of needle nose pliers.

This water inlet valve is used in refrigerators and freezers. It is used to facilitate the flow of water from the water supply line to reach the water valve, therefore flowing into the compact icemaker mold. If there is a leak, the ice maker is not making ice or it is not dispensing water, replacing the water inlet valve can solve the iss...Read moreue. Remember to unplug your refrigerator from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance.

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required for this repair include a pair of pliers and a socket set. Before installing this part you should take all perishable foods out of your refrigerator and store t...Read morehem somewhere cool, unplug the refrigerator from the power source, and shut off the water supply. This repair may require you to wear work gloves to protect your hands, and is considered an easy do-it-yourself fix.

Sold individually.

This wheel is sold individually. It is located on the bottom of the refrigerator.

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

If there is ice build-up in the freezer you may need to replace the defrost timer.

This genuine refrigerator door shelf bin provides convenient storage for bottles, jars, condiments, and other frequently used items while helping maximize available space inside the refrigerator door. Featuring a clear plastic design with white trim, it allows contents to remain easily visible and accessible while helping keep the refrige...Read morerator organized. Replacing a cracked, damaged, or missing door bin can restore storage capacity and improve everyday convenience. Installation is quick and tool-free—simply align the bin with the molded door supports and slide it securely into place. The bin measures approximately 18-1/2 inches wide by 8 inches high.

This part releases water from the supply line when it's activated.

This end cap is located on each end of the door handle. Sold individually. NOTE: Per manufacture the end cap is in a chrome plated with a dull finish.

Glass Only. Frame not included. This refrigerator crisper drawer cover insert is for refrigerators. Crisper drawer cover insert fits into the crisper drawer cover frame and covers the crisper drawer(s). Wear work gloves to protect your hands when installing this part.

This part is the replacement water filter cover for your refrigerator. It is made of white plastic and is approximately 13 inches long and 4 inches wide at the widest point. The water filter cover protects the water filter from damage while it is installed in the refrigerator. The main reason to replace the water filter cover is if it is ...Read morecracked, damaged, or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.