All Installation Instructions for AR10

switch shaft was broken.

22 of 26 people found this instruction helpful.

John from Burton, OH
Really Easy
Less than 15 mins
Pliers, Screw drivers

ordered new part, removed old unit, noted where wires connect, installed new one, done.

Was this helpful?

screw holes didn't line up

7 of 13 people found this instruction helpful.

Dena from Coral Gables, FL
Really Easy
30 - 60 mins
Screw drivers

I received the part the very next day which was awesome, but when I went to install it, there was a connection discrepency on the back of the switch, and the screw holes were completely off in the front where it connects to the unit. I ended up taking the whole thing apart to try to put the old face with the right screw holes on the new p ... Read more

Read less

Was this helpful?

condenser fan broken

3 of 7 people found this instruction helpful.

James from Canyon, TX
Really Easy
1- 2 hours
Pliers, Screw drivers, Socket set

pulled the cover off a/c, removed shroud covering fan. replaced the fan, reassembled a/c. works great.ty

Was this helpful?

The was piece of the fan that was broken off.

1 of 8 people found this instruction helpful.

Stephanie from Dorchester, MA
Really Easy
15 - 30 mins
Screw drivers

First removed the screw that held the ac together and then took old fan off replaced with new one.

Was this helpful?

No Control Of Temp.

24 of 163 people found this instruction helpful.

RICHARD from SAN ANTONIO, TX
Really Easy
15 - 30 mins
Nutdriver, Screw drivers, Wrench set

The part was easy to remove and replace. Instructions were easy to understand. Once removed and replaced. The a/c worked great. I could control the temp and not be freezing all the time.

Was this helpful?

AR10 - Instructions