AP13 - Parts

Genuine OEMt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a mo...Read moretor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is an authentic part from original manufacturer. It is compatible with some Ridgid planers. This part engages chains in order to move rollers. Sprockets are commonly replaced due to wear from normal use. This item is sold individually.

This is an authentic Ridgid replacement part. The brush holder is designed by the manufacturer specifically for use with a thickness planer. This part is made of high-quality plastic with metal connectors, and is used to hold the carbon brush in place in the motor housing. You will require a flat-head screwdriver when replacing this part. This item is sold individually.

This is a genuine Ryobi replacement part that is sourced from the original manufacturer to be used with compound miter saws. The screw is commonly used to fasten the upper guard assembly to the motor housing. This screw is sold as an individual replacement part, please note four screws may be required.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with planers and band saws. The metal washer has different applications based on the model of equipment and is commonly used to provide spacing and to prevent a nut from de-threading due to vibration. The washer is sold as an individual replacement part.

This is an original Ryobi replacement part. The retaining ring is found in planers and band saws from Ryobi. This part is made of metal and is used in different locations (depending on model) to hold other parts in a shaft. Please refer to the parts diagram to be sure of ordering the correct part. You may require pliers when replacing this item. This part is sold individually.

This is an OEM part sourced directly from the manufacturer. The sprocket is found in a Ryobi planer. This part is made of metal, and is used to turn the chain that powers the upper cover plate. You will require an Allen or hex wrench when replacing this item. This part is sold individually.

This is an original replacement part sourced directly from the manufacturer. The sprocket is found in a Ryobi portable planer. This part is made of metal, and is used to transfer motion from the height adjusting lever to the threaded spindle, to change the height of the cutter block housing. You may require an Allen or hex wrench when replacing this part. This item is sold individually.