- Home
- AMV2307PFS4
- Instructions
AMV2307PFS4 Maytag Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bulb burned out
-
Lester from Mesquite, TX
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.
Was this helpful?
Thank you for voting!
Burn't out bulb.
-
Carter from McCordsville, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the glass cover and replaced the bulb. Very simple.
Was this helpful?
Thank you for voting!
burnt out light bulb
-
Shirley from Londonderry, NH
- A Bit Difficult
- Less than 15 mins
-
Screw drivers
The problem I have with changing the bulb is my microwave is an overhead one and therefore I cannot tip it on its side to easily replace the bulb. I have to drop the lid down and carefully install the new bulb from underneath.
Was this helpful?
Thank you for voting!
replace light blub
-
roger from palm coast, FL
- Really Easy
- Less than 15 mins
removed grill cover, removed bulb plate, unscrew bulb, screw new bulb in socket,put bulb cover back on and screw grill cover back on. no issues whatsoever.
Was this helpful?
Thank you for voting!
The capacitor was melted in the microwave
-
Jocelyne from Fort Pierce, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with
... Read more
a fan.
Read less
Was this helpful?
Thank you for voting!
Burned out light bulb
-
Ray from Gatlinburg, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced light bulb.
Was this helpful?
Thank you for voting!
Microwave turntable stopped rotating.
-
Larrt from Minooka, IL
- Easy
- 15 - 30 mins
-
Screw drivers
1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place.
... Read more
5. Remove the motor. 6. Reverse the process using the new motor.
Read less
Was this helpful?
Thank you for voting!
Burned out lightbulb
-
Paul from Norristown, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
First let me say that I tried several places to get what I thought was a simple light bulb. This included several national hardware stores as well as a national electrical supply company. No luck. Went to the manual and PartSelect. Not only did you have it in stock, ship right away,at a reasonable price it arrived in a matter of days. One
... Read more
would not normally think of receiving a "how to" video to change a light bulb but you did. That impressed me. Suffice to say the replacement went well and you can be certain the next time I need a part I will go to you first. I am also impressed with the organizations with which you are affiliated with. BBB, Norton, PayPal, money back guarantee etc. Thank You The entire process was made pleasant with your support.
Read less
Was this helpful?
Thank you for voting!
2 burned out bulbs under the microwave/important light source for kitchen stove.
-
Ferol from San Antonio, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
I didn't do the repair -- my husband did, said it was easy, had no problems what so ever! The new bulbs give a lot more light to the cooking area.
Was this helpful?
Thank you for voting!