AMV2174VAS2 Amana Microwave - Parts

This top interlock support is a genuine OEM safety component designed for microwave ovens. It plays a critical role in ensuring the appliance operates only when the door is securely closed, preventing potential radiation exposure. The support holds the interlock switch in place and provides a reliable latching point, allowing the microwav...Read moree to function safely and efficiently. A faulty or misaligned support may result in the microwave failing to start, operating with the door ajar, or displaying error codes related to the door lock system. Replacing this part restores proper door engagement and ensures safe operation. Installation may require disassembling the control panel and should be performed with the appliance unplugged.

Also known as a switch holder.

As per manufacturer this no longer comes with the Spacer.

This is a manufacturer-approved mounting kit for your microwave. This kit is crucial for keeping your microwave securely wall-mounted. This kit does not include the mounting plate itself. This kit comes in handy if you buy your microwave separately from the mounting kit.

Bracket only. Hardware must be ordered separately.

Waterproof seal.

This authentic high-voltage capacitor stores and supplies electrical energy to the magnetron so that your microwave can heat up your food. It is a cylindrical component located inside the control area of the microwave. If the capacitor malfunctions, you may hear buzzing or humming noises, witness sparks or arcing inside the microwave, or ...Read moreexperience inconsistent or no heating of your food. As microwaves use high voltage, exercise extreme caution during the repair process to avoid injury. Even when unplugged, the capacitor retains a significant electrical charge. To replace it, start by unplugging the microwave and removing the glass turntable and support before proceeding. Refer to the user guide for instructions on accessing the capacitor within the cabinet. Discharge the capacitor by creating a short circuit between each terminal and between each terminal and the chassis. Do so by using a pair of insulated-handle needle-nose pliers to simultaneously touch both terminals. Alternatively, you can use a well-insulated screwdriver, touching one terminal and gently sliding it forward to the other terminal, holding it there for a few seconds. Avoid touching the metal part of the tool and be aware that this can result in a loud and startling popping sound. Once discharged, you can safely disconnect the wires and remove the mounting fasteners. Please note that this OEM replacement part is sold individually.