Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The vent gille was broken
2 of 3 peoplefound this instruction helpful.
John from Deluth, MN
Really Easy
Less than 15 mins
Screw drivers
The repair tool less than 5 minutes. The repair part fit perfectly. The new part looks and performs just like the original.
Was this helpful?
Thank you for voting!
Dropped the glass cooking tray and it broke in half
2 of 3 peoplefound this instruction helpful.
Emily C from Brandon, MS
Really Easy
Less than 15 mins
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!
E. Robinson
Was this helpful?
Thank you for voting!
The old coupling melted and the tray cracked in half.
2 of 4 peoplefound this instruction helpful.
Diane from Sheridan, AR
Really Easy
Less than 15 mins
It took me 15 minutes total - 5 minutes to clean the microwave, 1 minute to install three new parts, and 9 minutes to enjoy my celebratory glass of wine!
Took out turntable and swapped out old one with a new bright and shiny New one, ring that is. It was easy using the part from parts select Thanks Paul
Was this helpful?
Thank you for voting!
Very unusual. we had a brief fire inside the microwave which destroyed all the moving rotary parts.
1 personfound this instruction helpful.
Jan from ELK GROVE, CA
Really Easy
Less than 15 mins
First, we had to clean up all the interior surfaces, which was just cleaning. There was no internal damage. Then, just setting the center connector, rotary rollers and glass plate. Simple
Drive coupling cracked would no longer rotate turntable plate
1 personfound this instruction helpful.
Edward from CENTENNIAL, CO
Very Easy
Less than 15 mins
Screw drivers
used screw driver to pry up old part. lifted right off. line up drive couple drive push on. repair took less than 1 minute to repair. works like new Very Pleased with Parts Select replacement parts
Was this helpful?
Thank you for voting!
Broke rotating plate, it fell off counter after being washed
2 of 4 peoplefound this instruction helpful.
Lois P from Morris, IL
Really Easy
Less than 15 mins
Opened door and put new plate in.
Placed order on Thursday evening and received Sat Am
Was this helpful?
Thank you for voting!
Microwave door developed a crack around the frame.
1 personfound this instruction helpful.
Rick from CARLOCK, IL
Easy
30 - 60 mins
Screw drivers
Ordered new replacement door complete.
Was this helpful?
Thank you for voting!
Microwave turn table turns with door open, light on when unit off and door shut, slamming the door restored normal operation for a while.
1 personfound this instruction helpful.
Gregory from Barnwell, SC
Easy
30 - 60 mins
Screw drivers
Based on other similar posted repairs, I purchased the bottom switch. Upon removing the control panel to replace the switch, I found the blue 22 gauge wire was broken at the spade terminal. This wire had been crimped to the terminal along with a 14 gauge wire. Apparently the force to crimp the thicker wire weakened the smaller wire at
... Read morethe terminal. I stripped the end of the small blue wire and reattached it to the thicker wire using a solder iron and solder. The repair fixed the problem.
Read less
Was this helpful?
Thank you for voting!
Terminal leads were too wide on the thermostat.
1 personfound this instruction helpful.
Dale from LIVERMORE, CA
Easy
30 - 60 mins
I had to cut the leads on the thermostat to enable the wire terminal clips to fit on the leads. Not hard at all when the right tools are available. Care must be used because the leads are subject to being damaged. “ Hold leads with narrow needle nose pliers while cutting!
Was this helpful?
Thank you for voting!
Microwave not heating very well
1 personfound this instruction helpful.
CHRIS A from NEOSHO, MO
Easy
1- 2 hours
Screw drivers
Took microwave off the mount, removed all the outer covers except the face, used metal screwdriver to short the big capacitor to keep from being shocked, removed magnetron and replaced with new part. Put back together, hung on wall, and finished. I used a youtube video and it turned into a very simple fix.
Was this helpful?
Thank you for voting!
Burned out light bulb which lit the surface of the range.
1 of 2 peoplefound this instruction helpful.
Michael J from LORAIN, OH
Very Easy
Less than 15 mins
Screw drivers
Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.
Was this helpful?
Thank you for voting!
Replaced the charcoal filter.
2 of 5 peoplefound this instruction helpful.
John from BILLINGS, MT
Really Easy
15 - 30 mins
Screw drivers
On top front of the microwave are two Philip's head screws holding the rail on. Remove these screws and the rail snap out the old filter (noting the dark side down) then snapping the new filter in. Replace rail. 10 to 15 minute task.
Was this helpful?
Thank you for voting!
Glass tray shattered
1 of 2 peoplefound this instruction helpful.
Mouang from Sacramento, CA
Easy
Less than 15 mins
Ordered the glass tray and installed it. Received the orderin about two days.
Was this helpful?
Thank you for voting!
"Lost" microwave tray
1 of 2 peoplefound this instruction helpful.
Amelia from Charleston, SC
Really Easy
Less than 15 mins
Took out the turntable parts to ensure I ordered the correct cooking tray. Matching those with photos of related parts on PartSelect worked great. Put turntable drive and support ring in place and cooking tray went in very easily. Plan to order a second one to have on hand for this rental property.
My Orders
