AMV115 Amana Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic piece that spins turntable failed because of prolonged heat, I suppose.
2 of 2 people
found this instruction helpful.
-
Bill from CARBON HILL, AL
- Really Easy
- Less than 15 mins
Just opened the door and dropped in new part and viola!
Was this helpful?
Thank you for voting!
Broken turn plate.
2 of 2 people
found this instruction helpful.
-
LELIA W from MONTGOMERY, AL
- Really Easy
- Less than 15 mins
Cleaned the interior of my microwave, cleaned the new plate and simply added to the turn area.
Other Parts Used:
Was this helpful?
Thank you for voting!
I had broken the glass turn table.
2 of 2 people
found this instruction helpful.
-
Cheryl from ARVADA, CO
- Very Easy
- Less than 15 mins
I ordered another one and placed it inside the microwave. It works and fits perfectly. I received the order exactly as scheduled.
Was this helpful?
Thank you for voting!
Burned out bulb
2 of 2 people
found this instruction helpful.
-
Theresa from OVERLAND PARK, KS
- Very Easy
- Less than 15 mins
-
Screw drivers
Husband replaced the bulb
Was this helpful?
Thank you for voting!
WHEN I CLOSED DOOR IT WOULD HUMM
3 of 5 people
found this instruction helpful.
-
ROBERT from GLEN BURNIE, MD
- Easy
- 15 - 30 mins
REPLACED DOOR SWITCH ASSEMLY
Was this helpful?
Thank you for voting!
Replacement of hood light bulbs
2 of 2 people
found this instruction helpful.
-
Jerry from Pine, CO
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and tryin
... Read more
g to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together
Read less
Was this helpful?
Thank you for voting!
Broken Vent Grill
2 of 2 people
found this instruction helpful.
-
Donald from NORTH AUGUSTA, SC
- Very Easy
- Less than 15 mins
-
Screw drivers
Removed two Phillips head screws, installed the new Vent Grill, and carefully reinstalled the old screws, being sure not to over tighten them.
Was this helpful?
Thank you for voting!
Burned out light in microwave
4 of 8 people
found this instruction helpful.
-
DANNY from SAINT JOHNS, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
Spouse just screwed in the new bulb and reinstalled the light cover plate with the two screws. Took under a minute. Works great.
Was this helpful?
Thank you for voting!
Microwave didn't have support ring when house was purchased.
2 of 2 people
found this instruction helpful.
-
Leon C from MEDFORD, OR
- Very Easy
- Less than 15 mins
Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!
Place support ring in track
Place turntable on support ring.
Easy, peasy!
Was this helpful?
Thank you for voting!
The vent gille was broken
2 of 3 people
found this instruction helpful.
-
John from Deluth, MN
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair tool less than 5 minutes. The repair part fit perfectly. The new part looks and performs just like the original.
Was this helpful?
Thank you for voting!
Suspect light bulb was touching glass, and cracked glass due to too much heat.
2 of 3 people
found this instruction helpful.
-
Nick from Fenton, MO
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed one screw and droped the glass light bulb cover, bent the light bulb up so it wouldn't break the glass again, removed the broken glass and installed new glass by bending the tabs over the glass to hold it in place and re-inserted the cover, then screwed the retaining screw back in. Done in 3 min.. PartsSelect.com seems to be o
... Read more
ne of the few online parts ordering place that has schematics and easy to navigate site. Perfecto!
Read less
Was this helpful?
Thank you for voting!
Dropped the glass cooking tray and it broke in half
2 of 3 people
found this instruction helpful.
-
Emily C from Brandon, MS
- Really Easy
- Less than 15 mins
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!
E. Robinson
E. Robinson
Was this helpful?
Thank you for voting!
Broke rotating plate, it fell off counter after being washed
2 of 4 people
found this instruction helpful.
-
Lois P from Morris, IL
- Really Easy
- Less than 15 mins
Opened door and put new plate in.
Placed order on Thursday evening and received Sat Am
Placed order on Thursday evening and received Sat Am
Was this helpful?
Thank you for voting!
The old coupling melted and the tray cracked in half.
2 of 4 people
found this instruction helpful.
-
Diane from Sheridan, AR
- Really Easy
- Less than 15 mins
It took me 15 minutes total - 5 minutes to clean the microwave, 1 minute to install three new parts, and 9 minutes to enjoy my celebratory glass of wine!
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken Glass Tray For Microwave
1 person
found this instruction helpful.
-
SUSAN from ALDEN, NY
- Really Easy
- Less than 15 mins
Set it in the oven, wonderful!!!!!
Was this helpful?
Thank you for voting!