EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

AMC6158BAS Amana Microwave - Parts

1 - 12 of 65

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$5.45
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
Part #WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave will not heat properly, will not turn on, or the touch pad becomes unresponsive, there could be a faulty fuse which should be replaced. Remember, since this part contains an electrical charge, before you replace the fuse from your microwave, make sure that the power is disconnected from the unit. This part is sold individually. NOTE: Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged.
Micro Door Switch – Part Number: 3405-001034
$17.95
In Stock
Micro Door Switch
★★★★★
★★★★★
(12)
Part #3405-001034
This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open. Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.
Black Sleeve Diode – Part Number: WPR9800486
$23.95
In Stock
Black Sleeve Diode
★★★★★
★★★★★
(4)
Part #WPR9800486
In your microwave, the diode allows current to flow one-way only, converting alternating current to direct current. If you notice that your microwave does not heat properly, you may need to replace the diode. This product is approximately 3 inches in length. Before completing this repair, be sure to disconnect the power source from the microwave. The diode is located inside the main compartment of the microwave, so you will need to open it up before you can complete this repair. This is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.
High-Voltage Diode – Part Number: DE91-70063D
$28.26
In Stock
High-Voltage Diode
★★★★★
★★★★★
(4)
Part #DE91-70063D
This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your microwave turns on and starts but does not heat anything, this diode is likely responsible. You can check the continuity of the diode with a multimeter before outright replacing it, but it is important to remember that doing any repairs on a microwave and dealing with sensitive electrical components should be done carefully and with the appropriate precautions to avoid any hazards. To replace the high-voltage diode in your microwave, disconnect it from power and allow it to discharge. Using the appropriate screwdrivers, gain access to the control panel of the microwave. Using an insulated screwdriver, release any electrical charge in the capacitor by touching it across the terminals. Then you can remove any hardware securing the diode, including the harness connecting it to the capacitor, which may be easiest done with pliers. Connect the new diode to the capacitor terminal and the securing bracket, and then reassemble your microwave before connecting it to power again.
Humidity Sensor – Part Number: DE32-60011A
$95.35
In Stock
Humidity Sensor
★★★★★
★★★★★
(1)
Part #DE32-60011A
Ensure an optimal cooking experience with the Samsung Humidity Sensor Control. This quality component maintains the perfect moisture level inside your microwave, contributing to consistently perfect meals every time. Its function extends to being a Gas Sensor, accurately detecting humidity levels and communicating temperature information to the electronic control board. Installation is effortless and enhances the overall functionality of your microwave. However, due to the high voltage capacitors within the microwave, it is recommended that a service technician performs the installation. Depend on the reliability of genuine Samsung parts for all your appliance repair needs.
COUPLER – Part Number: DE67-00206A
No Longer Available
COUPLER
Part #DE67-00206A
Coil – Part Number: 2501-001011
$80.95
In Stock
Coil
Part #2501-001011
Magnetron – Part Number: WPW10126794
$173.93
Special Order
Magnetron
Part #WPW10126794
Thermostat – Part Number: DE47-20009A
$28.12
In Stock
Thermostat
Part #DE47-20009A
Glass Cooking Tray – Part Number: DE74-00023A
No Longer Available
Glass Cooking Tray
Part #DE74-00023A
This tray rotates in your microwave ensuring more even temperatures.
Drive Motor – Part Number: DE31-10170C
$72.74
In Stock
Drive Motor
Part #DE31-10170C
Noise Filter Assembly – Part Number: DE96-00400A
$79.95
In Stock
1 - 12 of 65