- Home
- AMC6138AAS
- Instructions
AMC6138AAS Amana Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rotate motor for Micrwave turntable failed
2 of 4 people
found this instruction helpful.
-
Charles from Lake Havasu City, AZ
- Easy
- Less than 15 mins
Turn off power to microwave (kitchen circuit breaker) Remove 3 sheet metal screws bottom front, disconnect electrical connections to motor and lights, remove defective motor(1 screw), replace with new unit, replace screw, re-attach bottom (3) screws, test. Replacement motor cost via th
... Read more
is supplier was 1/3 of what local appliance repair store would have charged.
Read less
Was this helpful?
Thank you for voting!
upper fan motor bad
1 of 9 people
found this instruction helpful.
-
SUSAN from DAVISON, MI
- A Bit Difficult
- More than 2 hours
-
Screw drivers, Wrench set
My repair went terrible as I was sent the wrong motor 2 times. My stove sat in the middle of my small kitchen for 2 weeks. Finally the 3rd was the correct one except I didn't have the right nut so I waited another day for that to be sent. Everything working good now, I just hope the bottom fan doesn't go out after this experience.
Was this helpful?
Thank you for voting!
no power to unit after replacing fuse
-
JOE from CENTERREACH, NY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
went to you tube and found a segment compatible to my issue.called the web site and ordered the thermostat fuse and ceramic fuse in case i had the wrong one purchased at the locale H/Depot. The only issue was I did not know that there was 2 different thermo fuses,,one controls fan and the other a basic one. luckily the fan wasn't the one
... Read more
that was blown.The woman i spoke to was very helpful and my order was AT MY HOUSE in less then 24 hours.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Bulb out
-
Clifton C from Kingsland, TX
- Easy
- 15 - 30 mins
-
Screw drivers
Pretty easy tear down and assembly once I removed it from cabinet (built in micro)
Was this helpful?
Thank you for voting!
No Heating.
-
Muhammad from Jersey City, NJ
- Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Information provided on the web site by Part Select, were helpful and encouraging to select and buy the part needed to repair the appliance. No doubt, a skilled person having background in the repair of appliances should attend such repair job.
Was this helpful?
Thank you for voting!
microwave would not heat.
-
outstanding from Galena, MD
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
hardest part was taking the microwave down off of the wall to gain access to the diode. Thought if was the transformer but ended up being just a blown diode. remove and replace and bench test. that part took 15 minutes . moral of the story don't boil water under the side of the microwave that holds the electric components.
Was this helpful?
Thank you for voting!