This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches ...Read morea certain temperature, it creates a spark. This electrode comes with the mounting bracket you will need to successfully install the part. Before installing your new part, shut off the gas supply and unplug your appliance. This part cannot be repaired. If it is damaged or faulty, it must be replaced.
Is your oven not cooling like it used to? You might need a new blower, a crucial component that circulates air to safeguard controls, wiring, and other parts from overheating. We understand how important it is to keep your oven in top shape, and that's where the genuine OEM Whirlpool Blower comes in. Specially designed for wall oven insta...Read morellations, it helps bring your oven back to peak performance, ensuring effective and efficient cooling. This blower isn?t just for Whirlpool appliances?it's the perfect match for a wide array of models from KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef too. But remember, ovens can have subtle differences, so it's a good idea to match the part to your model's specifications. This way, you can be confident it?s the perfect fit for your oven's needs. Installing your new blower requires a little care. Please disconnect the power first because safety should always come first. And don?t forget to wear work gloves to protect your hands. So, ready for your oven to cool like it's brand new again? Choose the genuine OEM Whirlpool Blower, the key to maintaining a safe, balanced temperature within your oven while extending its longevity.
This top burner knob is two and a half inches in diameter. It is all black in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions. This knob also has a gray indicator line. This knob will accept a 'D' shaped shaft, and it is two inches tall. Sold individually.
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, and it creates a seal between the burner knob and the control panel. The main reason to replace the gasket is if it no longer creates a seal...Read more, or if it is otherwise broken, damaged, or missing. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition module reaches a cert...Read moreain temperature, it creates a spark. This spark ignition module comes with the mounting bracket you will need to successfully install the part. Before installing your new part, ensure that the gas supply and power is disconnected from your range. This part cannot be repaired. If it is damaged or faulty, it must be replaced.
This top burner knob is two and a half inches in diameter. It is all white in color and is made of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions. This knob also has a gray indicator line. This knob will accept a 'D' shaped shaft, and it is two inches tall.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Electrode, no spark
52 of 62 peoplefound this instruction helpful.
HUY from ALISO VIEJO, CA
Easy
Less than 15 mins
Pliers, Screw drivers
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Was this helpful?
Thank you for voting!
top burners on stove won't ignite ,no clicking noise
48 of 73 peoplefound this instruction helpful.
scott from centreville, VA
Easy
15 - 30 mins
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one. Exact fit nomproblems.
Was this helpful?
Thank you for voting!
spark igniter was weak and not lighting the flame.
39 of 53 peoplefound this instruction helpful.
Daniel from Needham, MA
A Bit Difficult
1- 2 hours
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Open top oven door and remove the 2 front screws which hold the burners and controls to the frame. DO NOT lift the burners more than an inch or so to look inside. You WILL bend the gas lines in the back if you do. Pull out stove from the wall, shut off gas supply and disconnect hose if needed to have room to work. Remove top back panel an
... Read mored remove the 3 wires connecting the top burner assembly and also remove the 2 gas lines. Now you will be able to remove the burner assembly safely. Flip it over and try to unscrew the screw holding the igniter. When you fail, drill it out and get a small metal screw to replace it. The metal is soft and the screw is hard, so drill carefully. The rest is easy, put in the new igniter and screw. and put it back together.