AKGD Amana - Overview

Models starting with AKGD

Click on the best match to narrow your results.

Parts for models starting with AKGD

$50.56

Spark Ignition Electrode

★★★★★

(6)

Part #WPY0316773

This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches ...Read more

Read less

Double Burner Bowl

Part #WP315600B

This black double burner bowl is eighteen inches long and nine and a half inches wide.

Top Burner Knob - black

Part #WP31760504B

This top burner knob is just under two inches in diameter. It is all black in color and is made entirely of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions. At an inch and a half tall, this knob will accept a 'D' shaped shaft.

Spark Ignition Module with Bracket

Part #32020101

This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition module reaches a cert...Read more

Read less

$7.47

Range Installation Screw

★★★★★

(2)

Part #WP3400882

This screw is sold individually.

Top Burner Knob

Part #31760505W

Sold individually. This white knob accepts a D-shaped shaft.

Surface Burner Head

Part #WP7504P109-60

Sold individually.

$7.47

Refrigerator Single Hex Head Screw

Part #WP489069

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$7.47

Screw

Part #WPY04100059

$126.63

Top Burner with Electrode - Medium - 9k

★★★★★

(3)

Part #WPY0315768

$7.47

Screw

Part #WP693995

Bolt - m3x6

Part #WP23001134

This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.

Common Symptoms of models starting with AKGD

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Broken Electrode, no spark

52 of 62 people found this instruction helpful.

HUY from ALISO VIEJO, CA
Easy
Less than 15 mins
Pliers, Screw drivers

Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner

Was this helpful?

2 of 4 burners wouldn't light

25 of 29 people found this instruction helpful.

John from Alexandria, VA
Really Easy
Less than 15 mins
Screw drivers

Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one ... Read more

Read less

Was this helpful?

Burner would not ignite when control in "light" position

22 of 29 people found this instruction helpful.

Michael from Friendswood, TX
Really Easy
Less than 15 mins
Screw drivers

Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec ... Read more

Read less

Was this helpful?