This spark ignition electrode lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition electrode reaches ...Read morea certain temperature, it creates a spark. This electrode comes with the mounting bracket you will need to successfully install the part. Before installing your new part, shut off the gas supply and unplug your appliance. This part cannot be repaired. If it is damaged or faulty, it must be replaced.
This top burner knob is just under two inches in diameter. It is all black in color and is made entirely of plastic. This knob has light gray lettering denoting the off, low, medium, high, and light positions. At an inch and a half tall, this knob will accept a 'D' shaped shaft.
This spark ignition module lights the gas that starts the burner on your range or cooktop. This electrode is part of the burner assembly, sits next to the burner head, and is just over an inch in length. It pulls current from the ignition circuit; the more current it pulls, the warmer it gets. When the spark ignition module reaches a cert...Read moreain temperature, it creates a spark. This spark ignition module comes with the mounting bracket you will need to successfully install the part. Before installing your new part, ensure that the gas supply and power is disconnected from your range. This part cannot be repaired. If it is damaged or faulty, it must be replaced.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Electrode, no spark
52 of 62 peoplefound this instruction helpful.
HUY from ALISO VIEJO, CA
Easy
Less than 15 mins
Pliers, Screw drivers
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner
Was this helpful?
Thank you for voting!
2 of 4 burners wouldn't light
25 of 29 peoplefound this instruction helpful.
John from Alexandria, VA
Really Easy
Less than 15 mins
Screw drivers
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one
... Read more by one, put the stove top in place, connected the wires to the burner discs. Done, and it works! It took longer to find and order the part than it did to change it out.
Read less
Was this helpful?
Thank you for voting!
Burner would not ignite when control in "light" position
22 of 29 peoplefound this instruction helpful.
Michael from Friendswood, TX
Really Easy
Less than 15 mins
Screw drivers
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the elec
... Read moretrode wire to the electrode. drop the burner assembly back into position on the cooktop. Attach the burner assembly using two screws.