My Orders
AKD3 Amana - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
broken prong that knob fit onto
7 of 14 people
found this instruction helpful.
-
Lisa from Oklahoma City, OK
- Really Easy
- 15 - 30 mins
-
Wrench set
This was a piece of cake! We put off doing this for ourselves because we thought it would be difficult. We sold the house and "had" to do it. Turns out we should have done it for ourselves a long time ago.
Was this helpful?
Thank you for voting!
The Stem On The Burner Control Sw Broke Off
1 of 3 people
found this instruction helpful.
-
charles from franklin, LA
- Really Easy
- 15 - 30 mins
-
Screw drivers
I used a phillips screwdriver to remove the control switch. I drew a diagram on a piece paper where the wire contacts connected I wrote the different # and wire colors down . I compared the 2 switches they were the same. So I connected the wires . I put the 2 screws on. The stem was higher than the other switchers. So I had to cut
... Read more
the stem shorter. It had groves so it was easy to use a hacksaw to cut a little then use a lock pliers to hold the stem and another to break it off then it fit perfect I put the knob on presto new switch. Just like new.
Read less
Was this helpful?
Thank you for voting!